How to clear the blocked water tank of automobile heater?

The heater tank of the car is blocked. You can blow it with compressed gas first to see if you can get through. It is necessary to remove two pipes from the hot air tap water pipe, and then blow through the hot air tank. This method is very simple, but it can only be applied to the specific situation that the water tank is blocked by soft mud. The long-term operation of the car will inevitably produce organic waste gas, so the owner should pay attention to the maintenance of the car at ordinary times to prevent the water storage tank from being blocked by waste.

In addition, it is easier to solve the blockage of the warm air tank by finding a car wash shop, then asking the maintenance man to remove the inlet and outlet of the warm air tank, and then washing it back and forth with the high-pressure water gun of the car wash shop until the washed water turns blue. If there is a special scale remover, you can also discharge the original automobile antifreeze, apply it together with the scale remover, and then add a new frozen liquid. And if the above methods are difficult to deal with, we will have to change a new heater tank.

Attachment: Frequently Asked Questions on the Use and Maintenance of Automobile Water Tank

1. The hardness of application water must be dissolved before application to prevent the heat pipe radiator from blocking and scaling. In the case of applying automobile antifreeze, in order to better prevent the heat pipe radiator from being corroded, we should choose high-quality and efficient antirust automobile antifreeze produced by reliable manufacturers that meet the industry standards.

2. In the whole process of daily use, check the water level line anytime and anywhere, and then add water after stopping the machine to cool. When adding water, gradually open the cover of the water tank, and try to avoid the water inlet of the water storage tank, so as to avoid the pressurized steam sprayed from the water inlet from scalding your body.

3. When water is drained from the heat pipe radiator before adding water, you can turn on the drain power switch of the oil pan first, and then turn it off after the running water is drained, so as to prevent the formation of bubbles.

Million car purchase subsidy