Automobile lighting collection
car lights include running lights, low beam lights, high beam lights, fog lights, turn signals, reversing lights, etc. Many people don't know how to use car lights correctly. Many people think that the brighter the car lights, the better. They think that as long as their lights are on, they will be safe. Let's have a look!
1. Running lights: also known as "small lights", are generally the first gear of the light switch. At this time, all the instrument lights in the car are on, and the two small lights at the front and rear of the car are also on. The brightness of these two lamps is not high, mainly to make the four corners of the car body visible. Generally, this light should be turned on when it is dark, rainy or in dark places such as underground parking lots.
2. Low beam lamp: used when driving in urban areas at night. On the one hand, all roads in the city are illuminated by street lamps, and it is not necessary to explore the distant road surface with high beam lights, but only to see the road surface in front of the car; On the other hand, there is a lot of traffic on urban roads, so turning on the high beam will not only dazzle other vehicles when they meet, but also affect the sight of pedestrians on both sides of the road. In the case of heavy rain, heavy snow and other energy, not only the visibility is very low, but also the braking distance of the vehicle will increase a lot, so it is best to turn on the low beam at this time, so that other vehicles can find themselves at the farthest distance.
3. high beam: when the high beam is turned on, a striking blue light will light up on the dashboard of the car as a reminder. It is more appropriate to use high beam in the wilderness or on the road without street lights, but remember to switch back to low beam when you meet a car, so as not to dazzle the other driver. If there are many vehicles on the road, it is best to switch to low beam mode when approaching the vehicle in front, so as to reduce the interference to the driver in front.
many drivers like to honk their horns when overtaking on the expressway. In fact, it is because the engine noise and wind noise of the vehicle are very loud when the speed is fast, and it is difficult to hear the sound inside the vehicle before honking the horn, especially those trucks. Therefore, when overtaking, it is best to push the lamppost up a few times and use the high beam to indicate the vehicle in front.
4. Turn signal: The most basic purpose of turn signal is to signal other vehicles and passers-by to remind others to pay attention when turning. Sometimes turn signals can also be used as lighting in narrow places, so that drivers can observe obstacles on both sides. When the turn signals on both sides are turned on at the same time, it plays the role of warning and widening. When you turn left and drive off the road, turn around or pull over on the road without the central isolation belt, you should turn on the turn signal in advance and switch the headlights to the low beam, because the pedestrians and vehicles on the opposite side will be dazzled by the headlights, and it is difficult to see the turn signal flashing.
5. danger warning flash: it is what we often call "double flash" and "double jump light". As a signal, it is mainly used to remind other vehicles and pedestrians that something special has happened to this car. So, under what circumstances do you use double jump lights? First, when there is a fault or traffic accident on the road, and second, when towing a faulty motor vehicle, both the tractor and the towed vehicle should turn on the danger warning flash. Some friends like to turn on the double jump lights when they encounter poor visibility such as fog, rain, snow, dust and hail. However, at this time, the turn signal has lost the function of turning prompt, so in this case, it is best to use low beam lights and fog lights, and try not to use double jump lights. If you use them, you must observe the situation before and after changing lanes. In addition, when a motor vehicle is driving on the road, it is not allowed to turn on the danger warning flash at will. 6. Fog light: It is easy to understand from the name that fog light is a light signal used in foggy days. Fog lamps have stronger penetrating power in fog, which makes it easier for vehicles or pedestrians to notice in advance. Some friends like to turn on fog lights and high beams when driving in foggy days, thinking that they can see farther. In fact, this effect is not good. Because the illumination angle of high beam is easy to scatter light, its penetration is the worst in foggy days. At this time, you should turn on the front and rear fog lights, use the low beam lights and reduce the speed.
7. backup lights: when reversing, there will be white backup lights at the rear of the car. On the one hand, it can illuminate the road and obstacles behind the car and reduce the blind spots when reversing. On the other hand, it is also a reminder to pedestrians at the rear of the car. The reversing lights are all related to reverse gear and do not need to be operated separately. However, if the reversing lamp fails, it should be repaired in time to avoid danger when driving at night.
how to use the headlights correctly?
1. drive the motor vehicle to the left, change lanes to the left, prepare to overtake, and turn on the left turn signal light in advance when leaving the parking spot or turning around.
2. drive the motor vehicle to turn right, change lanes to the right, drive back to the original lane after overtaking, and turn on the turn signal in advance when parking on the roadside.
3. When driving a motor vehicle in low visibility conditions such as rain, snow, dust and hail. Turn on the headlights, side indicator lights and rear position lights, but when the rear car is driving in the same direction, the low beam lights shall not be used.
5. When driving a motor vehicle in foggy days, turn on the fog lights, hazard warning flashlights, headlights, position lights and rear position lights, but don't use the high beam when the rear vehicle driving in the same direction approaches the front vehicle.
6. turn on the high beam, position indicator light and rear position indicator light when driving a motor vehicle without street lights and poor lighting at night. However, when the rear vehicle driving in the same direction is close to the front vehicle, the high beam shall not be used.
7. At night, when driving a motor vehicle through sharp bends, slopes, arch bridges, crosswalks, intersections without traffic lights or overtaking, you should alternately use low beam lights, and when meeting pedestrians or non-motor vehicles on narrow roads and bridges, you should use low beam lights.
8. When driving a motor vehicle near a sharp bend, the top of a ramp and other sections that affect the safe sight distance, or overtaking or encountering an emergency, you should slow down and honk your horn.
9. When a motor vehicle breaks down on the road or a traffic accident occurs, which hinders traffic, you should turn on the danger warning flash according to the regulations, and set up a warning sign at the back of the vehicle 5 meters or 1 meters. At night, position lights and taillights should also be used at the same time.
1: drive a motor vehicle from the ramp into the expressway, turn on the left turn signal and drive into the acceleration lane, without hindering the normal driving of vehicles already driving on the expressway.
11. When driving a motor vehicle away from the expressway, turn on the right turn signal in advance, drive into the deceleration lane without hindering the normal driving of vehicles on the expressway, and then drive into the ramp after deceleration.
million car purchase subsidy