How to use Haier XQG70-B 10266 drum washing machine?
1. Laundry preparation: The material box of the drum washing machine has three slots, which are used to put the main lotion, softener and pre-lotion from left to right. The main lotion generally refers to washing powder. If wool products are washed, you can put special lotion here. The softener should be put in the middle bucket, and the washing machine will be released into the bucket at the right time. We generally don't use too much detergent, which mainly refers to the soaking agent before formal washing, such as clothing sizing agent and dyeing agent.
2. All detergents must be put in before the laundry procedure begins. After the program is started, the tap water from the water inlet pipe will be introduced into the feed box first, and then enter the drum from the feed box, so that the diluted washing powder will be washed into the drum by the water flow.
3. The application scope of each program introduced in the instruction manual of washing machine is for reference only. When using, it is best to choose flexibly according to the dirty procedure and easy-to-wash procedure (i.e. material) of the fabric.
4. In daily household washing, except for dirty and heavy fabrics and expensive and brittle fabrics, all kinds of fabrics are not classified by materials, but washed together. At this time, chemical fiber fabric program or standard washing program should be selected. In summer, you can wash all kinds of light fabrics that are not dirty. You can choose wool program or weak washing program.
5. Only when washing dirty and heavy fabrics, you need to choose the cotton fabric program. Washing dirty knitted fabrics can also use chemical fiber fabric program or standard washing program. The wear rate of drum washing machine on clothes is only a fraction of that of pulsator washing machine, and drum washing machine can wash clothes better. Generally, we don't have to consider the damage problem, but how to save electricity, water and time.
6. It should be noted that if you want to adjust the program during washing, you need to turn off the power switch first, and then turn the program knob clockwise to adjust the program. Turning the program knob without turning on the power supply may damage the program controller.