How to tie the steel wire cup with the drip wheel

The method of using the cup of the gear train in the water: thread the thread through the cup, tie the two strands and cut off the excess. Then pinch the thread passing through the coil with your thumb and forefinger, and after the other end is pulled out, put the thread cup into the coil and tighten it.

First of all, prepare the drip wheel to tie the cup. A wire wheel and an outer cup are arranged in the cup body, the wire wheel can rotate, and there is a scale above it, which is convenient for judging or adjusting the wire diameter in advance; There is also an access hole on the outer cup, which can slide the inner ring, so that the inner ring of the wire cup can slide up and down, which is convenient for sorting and adjusting the wires in the wire cup.

Pass the thread through the hole of the thread cup, leaving the remaining thread, which can be used to carry hooks or other terminal fittings. Then start to fix the thread in the threaded cup, that is, fix it on the upper part of the drip wheel. After the thread is inserted into the drip wheel, stretch correction is carried out to pull the straight line. In order to make the thread in the cup more natural, it is necessary to gently pull the thread out of the cup by hand and bend it outward.

When adjusting the thread, if it is necessary to reduce the space of the thread cup, adjust the thread wheel smaller, which can make the thread more compact and smooth. If the thread needs to be tightened, the scale on the head of the threaded wheel needs to be changed. After the wire cup is connected with the drip wheel, put the iron wire plastic pre-installed with the hook in the middle of the wire cup, so that the iron wire on the hook wraps around the cup inward, and the hook can first fall on the bottom of the cup.

Knowledge of drip cup capacity:

Different from the spinning wheel, the thread capacity of the drip tanker differs by 1000 2000 2500. The choice of drip wheel is mainly based on the function, such as micro-wheel, perch wheel and long throwing wheel, because the function has decided the size of the threaded cup, that is, the capacity problem. The choice of drip wheel is mainly functional, which can be divided into micro-wheel, bass wheel and long throwing wheel.

The selection of silk cup capacity usually does not appear on the drip wheel. At present, there are two kinds of fishing wheels, one is spinning wheel and the other is horizontal wheel (including drip wheel and drum wheel). The micro-wheel is a shallow cup, and the cup depth of the bass wheel and the long-throw wheel is slightly different according to the design. It only needs functionality to choose, regardless of the capacity type of the conductor cup.

When buying a spinning wheel, the most important consideration is the size of the cup, which is called 1000, 2000, 2500, 3000 and so on. There are also options of micro-objects and remote projection, but these two functional options are not obvious on the spinning wheel.