What's the function of car cleaning accelerator?

1. On gasoline engines, the throttle valve is generally installed at the air intake of the engine. Above it is the air filter of the car, and below it is connected with the engine main body. Therefore, the throttle is figuratively compared to the throat of the engine;

2. Throttle valve is a valve with adjustable opening and closing size. Just as the faucet can adjust the flow of water, the throttle can also adjust the amount of air entering the engine. Air enters the combustion chamber inside the engine through the throttle and mixes with the fuel sprayed by the electronic nozzle to form combustible gas. Combustible gas burns in the engine to do work, thus driving the car;

3. The more combustible mixture, the faster the engine speed; If there is less combustible mixture, the engine speed will be lower. Therefore, the throttle can control the engine speed, which coincides with the role of the accelerator pedal, another part of the car. It turns out that the accelerator pedal of an automobile is connected with the accelerator through a certain mechanical structure. As soon as the accelerator is stepped on, it opens. The more you step on the accelerator, the greater the opening of the accelerator and the faster the acceleration of the car.

In the past, the accelerator was directly controlled by the accelerator pedal, but now the technology is more developed, and it is safer to change the electronic control into computer control. The key of the throttle is to control the airflow and the normal operation of the engine;

5, and some factors will cause the throttle to become a throttle, and the right side is dirt. Because the throttle valve controls the intake flow, air will enter the engine from the throttle valve, and dust will inevitably fall, so it is necessary to clean or replace the pore filter regularly. The normal throttle is closed when it is closed, and then there will be dirt after a long time, which will lead to the increase of throttle opening and air flow, which will not only save energy, but also cause engine jitter and idle speed acceleration, which will seriously lead to poor oil supply;

6, cleaning should also pay attention to in addition to the use of special cleaning agent, but also to avoid the throttle electric control component is the throttle motor, try to avoid being wet when cleaning. When cleaning the throttle valve, the throttle plate will be rotated, which changes the original position and needs cooperation. It should be noted that after cleaning, the computer must match and restore the original opening, otherwise the computer will default that this is the original opening, resulting in large intake flow and unstable idle speed. So don't tamper with your words.

Million car purchase subsidy