How to remove the water pump of Jiangling Yuhu 3

The specific steps to remove the water pump of JMC Yuhu 3 are as follows:

1. Drain the coolant in the cooling system and replace it.

2. Remove the control panel. Detach the cable holder on the left side of the heater unit and remove the screws from the wire terminals. Unplug the wires behind the blower motor and connect it to a connector. Disconnect the vacuum tube and light wires from behind the heater control.

3. Place a container under the engine and under the water supply pipe of the heater device behind the cylinder head. Disconnect the heater water supply pipe behind the cylinder head.

The Yuhu 3 is a pickup truck manufactured by Jiangling Motors.