Is BYD f6 warm air hot or not? Why?

The passage of the warm air water tank is blocked, resulting in insufficient hot water. Insufficient hot water will cause the water tank to be half hot and half not hot, and the wind blown out of the unheated air duct will not be hot either. It is recommended to clean the passage of the warm air tank.

There is air resistance in the engine cooling system, which leads to poor circulation of the cooling system, high water temperature and not hot warm air. If there is air in the cooling system all the time, it is likely that the cylinder pad is damaged and air leaks into the cooling system. If the inlet pipe of the small heating tank is very hot and the outlet pipe is very cold, this situation should be that the small heating tank is blocked and should be replaced.

Extended data:

Precautions:

Because the car has just started, the engine and water tank have not reached the ideal working temperature at this time. At this time, the heat is transferred to the car prematurely, which is equivalent to the car constantly providing more heat to the engine and water tank, and the fuel consumption will naturally increase at this time.

We should let the engine and water tank reach the ideal working temperature first, and generally turn on the warm air after starting the car for 5 minutes, so that the hot air is strong and stable, and it will not lead to an increase in fuel consumption.

When heating is turned on, if you want to heat quickly at this time, you can turn on the external circulation, which can quickly discharge the cold air inside the car and purify the air inside the car. At this time, it can be heated quickly, usually about 3 minutes, and then transferred to internal circulation. This method can also reduce the fog in the car.

Baidu Encyclopedia-BYD F6

Baidu encyclopedia-automobile heating system