What should you pay attention to when installing a washbasin mirror?

When installing the washbasin mirror, attention should be paid to: installation height, fixing method, protection of the mercury surface, etc.

1. The installation height of the bathroom mirror: the bottom edge of the bathroom mirror is about 135 cm from the ground (or the center of the mirror is kept at about 160-165 cm from the ground).

2. How to fix the bathroom mirror: First measure the hook distance behind the mirror, then mark it on the wall and drill holes at the mark. If it is a ceramic tile wall, you need to use a glass drill bit to drill into the ceramic tile first, then use an impact drill or electric hammer to drill in 3CM. After drilling the hole, put in the plastic expansion tube, and then screw on the 3CM self-tapping screws, leaving 0.5CM outside. Then hang the mirror. Pay attention to protecting the wall when drilling holes, and choose to drill holes at the joints of tiles.

3. Protection of the mercury surface: If you use glass glue to fix the mirror, be careful not to use acidic glass glue. You should choose neutral glue (acidic glass glue usually damages the mercury on the back of the mirror, causing mottled mirror surfaces) .

4. Installation of bathroom mirror lights: Bathroom mirrors generally need good lighting, so mirror front lights or mirror side lights are very necessary. When installing mirror headlights, pay attention to prevent glare. It is recommended to install a lampshade or choose a lamp with a frosted glass surface.