The installation method of crystal chandelier is so simple.
Installation method of crystal chandelier
1. Determine the installation location. When installing the crystal chandelier, we must first determine the installation location, and at the same time pay attention to the size of the room and the crystal chandelier. In an elegant big house, crystal chandeliers are the best decoration, especially in the living room. A crystal chandelier large enough will make the whole room more substantial and high-end atmosphere. But if a large crystal chandelier looks too crowded in a medium-sized room, it will be more perfect to hang a smaller crystal chandelier.
2. Inspection of lamps and lanterns. All relevant accessories of the crystal chandelier should be complete. In order to ensure the beauty, all parts should be intact. Secondly, the minimum cross-sectional area of each conductor should be configured according to the specifications to prevent accidents.
3. Disconnect the power supply. In order to ensure safety, it is recommended that you do it under the premise of power failure, which is the most basic safety guarantee.
4. Check the weight of the crystal chandelier. When installing crystal chandeliers, weight must be considered. When the chandelier weighs more than 3 kg, it should be fixed with embedded hooks or bolts. When the weight of the cord chandelier lamp is greater than 1 kg, a hanging chain should be added.
5. Install the hanging plate. Ensure that the bearing capacity of the fixing nut matches the weight of the crystal chandelier, so as to ensure that the chandelier will not fall off after installation. After these are determined, you can fix the expansion screw on the hole position with the drill bit of the electric drill, pay attention to the position of the hole, and don't drill sideways. After drilling the hole, put the hanging plate into the expansion screw with the installation screw in the lamp, and tighten both sides to ensure the balance of the hanging plate.
6. Install the light bulb. When crystal chandeliers are installed in flammable structures, such as wooden chandeliers or flammable materials on the roof, they must be insulated and fireproof. When installing the light bulb, the wiring should be connected to the terminal of the center contact, and the zero line should be connected to the threaded terminal. When using screw base for lamps and lanterns, the phase line should be connected to the top of the base, and the zero line should be connected to the screw. Remember to turn on the light when all the light bulbs are installed. Finally, just hang the ornaments on the crystal chandelier.
Cleaning method of crystal lamp
Method 1: Wash your hair, which is long and soft, not the kind that is washed with paint and written with a brush. The longer the time, the better. Dust will be removed by electrostatic friction.
Method 2: Professional cleaning agents can be used. Professional cleaning agents are similar to alcohol, which are volatile and take away dust in the process of volatilization, but the cleaning effect is not ideal.
Method 3: Remove the lamp and clean it manually. Prepare tools and supplies, such as ladders, cloths and detergents.
1. Turn off the power supply first, and put a sponge pad under the crystal lamp to prevent the ladder from scratching the floor and preventing the crystal ball from being damaged when it falls.
2. Hold the ladder steady. One of them climbed up and put the crystal balls in the bucket one by one, and then took them down in turn (when taking them, mark the installation positions of different crystals clearly with a pen and paper for installation).
3. Bolt a bucket with a crystal ball to the faucet, pour it into the bucket as a professional cleaning agent, fill it with water and clean it one by one. Then wipe off the water drops on the crystal ball, and then clean the light bulb with a dry towel.
4. After picking the crystal ball, the person on the ladder wipes the electroplated lamp holder with a towel.
5. After wiping, start the installation according to the drawings.
Selection method of crystal lamp
1, pay attention to the brand logo
The quality and price of different brands of crystal lamps will vary greatly. Some well-known brands will engrave the brand logo on each crystal veneer to ensure its quality and prevent confusion, as long as you carefully identify it when buying. It is very likely that "the golden jade is outside, but it is defeated", such as installing high-quality lamp beads on the periphery or conspicuous place of larger crystal lamps, and shoddy them in the inner layer or hidden place of the lamps. Therefore, you must polish your eyes to get what you like when buying crystal lamps.
2. The specifications of the pendant are very special.
It is of great significance whether the pendant specifications of crystal lamps are unified. Crystal lamp can shine brilliantly, showing gorgeous and noble temperament, all by a string of crystal pendants. If the pendant is layered with different sizes and shapes, it will inevitably affect the overall beautiful display of the crystal lamp. If the holes of some pendant of imitation crystal chandelier are not standard, it is easy to crack. If the pendant of crystal chandelier falls from smallpox, it will pose a threat to the safety of family members.
3. Clarity and transparency are clear.
Crystal lamps on the market generally start from 1000 yuan. Among them, the origin and purity of crystal are the main factors causing the price difference. Crystal is actually a kind of glass, a kind of purified product, and the price varies according to the lead content. Therefore, when buying crystal lamps, we should carefully identify good quality crystals through their brittleness and transparency.