Where should I put the decorated weak box? Should I change it? Can the decorated weak box be moved?
First, where will the weak box be arranged?
The weak box should be placed on the wall near the door, such as behind the door, which is convenient for maintenance and does not affect the appearance.
Leakage circuit breakers should be installed in the distribution box, and several sockets should be provided to control lighting, air conditioning, sockets, etc. The circuit should ensure the normal use of the load. _
If the position of the phase line and the zero line facing the power socket is left and right, the socket with grounding hole should be located in the front and grounded reliably. Switch socket should be installed firmly. Visual inspection and manual inspection are adopted, and special tools for circuit testing are used to check whether the positions of phase and ground wires on the socket meet the requirements.
Therefore, when decorating the weak box, indoor wiring should be laid through pipes and a single copper conductor with good insulation should be used. When laying through the pipe, the total cross-sectional area of the wires in the pipe should not exceed 40% of the cross-sectional area of the inner diameter of the pipe, and there should be no joints and kinks in the pipe. Conductors and wires, communication lines, etc. Shall not be installed on the same pipeline. _
Second, do you want to change the decorated weak box?
When the new house is renovated, the weak electrical boxes reserved for us by developers are generally small, so basically every family needs to be replaced during construction. Otherwise, let alone routers and optical cats, and workers will be very crowded and messy when laying cables. Therefore, it is very necessary to replace the large-sized weak box. Just in the choice of lines, many people may have overlooked it, which is also the reason why the transmission speed of home network is affected after the late check-in.
Although developers basically use qualified products, some developers use thin iron distribution boxes in order to save costs. If you are not at ease, you can replace it. Generally, there are retail indoor distribution boxes on the market, and the price is not very expensive. Whether to replace it depends on the needs of the weak current system in your room and the overall design structure of the house. For example, whether the installation of the weak current box has an impact on the whole decoration.
3. Can the decorated weak box be moved?
The weak inner box can be replaced by a weak inner box with matching capacity according to the detailed situation at home, especially the detailed configuration scheme of some digital equipment and audio equipment. This requires a number of professional data lines, generally through the weak box.
When concealed works are done in the early stage of the expansion of the weak box, strong electric wires can be installed in the weak box, so that when power supply is needed in the future, it can be connected from the reserved strong electric interface.
Each family's weak box has a different location, height and area. If there are many rooms in the house that need wiring, or there are more than two computers in the house, you need to configure a router in the weak box, and the router needs power. If it is too low, children like to play, which will confuse the lines or be dangerous; If it is in the living room, it will affect the appearance; If it is close to the bathroom, it is easy to get wet. , put it behind the movable furniture.
The above is the knowledge that Bian Xiao shared for you about where to put the decoration weak box, whether to replace the decoration weak box and whether the decoration weak box can be moved. I hope it helps you. If you want to know more about the decoration of weak boxes, please continue to pay attention.