Basic inspection of automatic transmission throttle and shift cable inspection

Throttle opening inspection is mainly used to check whether the engine output power is within the specified value range. The looseness or tightness of the cable is caused by the relative position movement between the car body and the automatic transmission, which should be checked and adjusted in time. Check the throttle cable (lever). When the throttle valve is fully open, the distance between the throttle cable mark and its sleeve is 0 mm ~1mm. The looseness or tightness of the cable is caused by the relative position movement between the car body and the automatic transmission, so it should be checked and adjusted in time. The modulation method is as follows: Step on the accelerator pedal to the end and check the throttle valve, which should be fully opened at this time. If the throttle valve is not fully open, adjust the accelerator pedal lever; Continue to step on the accelerator and loosen the adjusting nut; Adjust the external cable so that the distance between the end of the rubber sleeve and the cable stopper meets the standard.