The knowledge about the beauty agent introduces the construction steps and knowledge of the beauty agent.

Meifeng is a new decorative product. Meifeng agent is made of various high molecular polymers and advanced pigments, which can completely solve the problems of dull and new quality of white cement filled tiles. Bian Xiao mainly introduces the beautiful sewing agent in detail today. This time, the relevant knowledge and characteristics of sewing agent are introduced emphatically, so that customers can choose from all aspects. I hope it will help everyone and have a good decoration effect.

First, beautiful sewing-do it yourself.

If you decide to make a beautiful seam and want to do it yourself, congratulations, you will save thousands of times. Ceramic tile joints are simple and clear, just follow the construction instructions. But if you want to be beautiful, it is a bit difficult without certain experience.

Buying fragrances on Taobao, in general, you will get the tools you need in addition to fragrances, which looks more complicated. In fact, there are not many steps, but it is still more troublesome to operate.

Confirm whether it is half full or full before filling the gap. Half-filling means that the decoration master uses cement-based grouting as the foundation, and then fills in grouting. This is more cost-effective, but it will reduce the service life of beauty grouting; Complete filling is directly applied to beautiful grouting, which has a good effect, but the engineering quantity is large and the cost is high.

If there is sand and dust in the gap after the tile is laid, the aesthetic effect of the joint will be greatly reduced. It is necessary to clean up the dust and water in the cracks.

Second, the United States sewing step

1, clean the impurities in the gap with a tool knife or a cleaning cone.

2. Use a brush to remove dust from impurities.

3. Carefully suck the gap with a vacuum cleaner and clean it twice.

4. Wipe the gaps and sides with a semi-dry towel.

This is a routine step of gap cleaning, or it is relatively easy. But if the gap is filled with cement, cleaning with a cleaning cone is too slow and laborious. At this time, use an angle grinder. Align the gap with the circular saw blade at the front end of the angle grinder, crush the cement in the gap, and then clean the dust in the gap with a tool knife.

Third, the American seam method

1. Paste textured paper or paint joint wax.

If the US grout accidentally falls on the rough surface of anti-slip bricks and antique bricks, it will be difficult to clean after solidification. Therefore, before gluing, it is necessary to stick masking paper on the edge of the tile to avoid the difficulty of subsequent cleaning. If it is serious, it will scratch the tiles. Sticking a piece of exquisite sewing paper of about 1mm on the edge of the tile gap can prevent the overflowing cosmetic agent from polluting the tile.

In addition to textured paper, there is also a beautiful sewing wax. Beautiful splicing wax is easy to use and can isolate both sides of the gap. If you fill the seams, you can clean up the remaining materials with a scraper.

glue

Whether it is a single tube or a double tube, it will be equipped with a glue gun nozzle and directly squeezed into the seam. The key is that the speed of the glue gun and the speed of the glue gun should be gentle during construction. When applying glue, don't be too fast, even and slow, so as to ensure that the glue is even and balanced.

3. Pressure joint

When riveting, when the coating is still flowing, gently press it with a pressure ball (be careful not to wait until the whole surface is full before using the pressure ball). The effect of using compression balls to trim joints can leave micro-grooves in the cracks of tiles to prevent scratches in daily life. Tear off the masking paper stuck on the tile to avoid the masking cement on the masking paper and the masking cement in the tile from sticking together after drying.

Shovel glue

Usually, after 24 hours, after the cosmetic agent dries, the tiles without masking paper should be scraped off with a scraper. If the weather is too cold, it may need to be extended to 48 hours.

Fourth, the United States seam-tip

1, before the coal seam in the United States, it is best to try it in a small area. First of all, I think the chosen color matches the tiles well.

If I don't think I'm doing well, I won't delay the professional sewing master.

3. It is best to choose two-component water-based beauty grouting for beauty grouting, which is both environmentally friendly and easy to construct.

That's all the contents of Bian Xiao's introduction to the beautiful sewing agent.