How to disassemble and clean Emmett electric fan teaches you the correct disassembly and cleaning steps.

1. First, loosen the chuck of the electric fan protection net by hand.

2. After loosening, you can take out the front cover of the electric fan by hand.

3. Then screw out the motor shaft nut directly by hand.

4. After the plastic nut is removed, the blade can be taken out, requiring manual removal of the blade.

5. Loosen the rear mesh nut and screw it out by hand.

6. Remove the back net and manually remove the back net.

Extended data:

note:

1. If you clean the electric fan yourself, you must cut off the power supply in advance. You can scrub it with a wet rag, but you must dry the water on it after cleaning.

2. The motor is the most important maintenance part of the electric fan. It is necessary to remove the screws to repair the motor, mainly to check whether the bearings and gears of the motor need to be oiled. Nylon gears are particularly easy to break down and need regular maintenance. You can use household sewing machine oil or ordinary gear oil to drip on it for lubrication and maintenance.

3. Ordinary floor fans, desk fans, box fans, etc. Easy to disassemble and clean. Clean the fan blade and cover with water after disassembly. In some families, there may be some stains on the fan blades that are difficult to remove, such as smoke stains and oil stains. At this time, it can be washed off with a detergent that removes oil fumes. This cleaning only involves the surface of the fan, not the inside of the machine.