Which decoration should be done first, the floor or the wall?

Generally speaking, the wall is done first, and then the floor is done. Because if you do the floor first, it will be difficult to do the sanitation work later, and if it is a wooden floor, it will be damaged, so I suggest you do the wall first. Extended information

Decoration precautions

In daily life, we can often see glass. Different types of glass in home decoration are used for different purposes, and there are also great considerations. Glass It can be roughly divided into: frosted glass, patterned glass, colored glass, wired glass, and glass bricks. The uses of glass in bedroom decoration include: glass cabinet doors, bathroom glass doors, partition glass, glass doors, glass brick partitions, glass ceilings, etc. When it comes to glass, mirrors naturally come to mind. It is unimaginable to live without mirrors in the living room. The position of the mirror is very important, that is to say, what kind of mirror should be placed in what kind of space. For example: the bedroom should be equipped with a full-length mirror, a large flat mirror should be hung on the wall of the restaurant, a bathroom mirror, a display cabinet mirror, etc.

Many families have to remove the original bathroom wall and floor tiles and lay new ones during renovation. The result of this is that waterproofing work needs to be done on the bathroom wall and floor again. If there is a quality problem with the waterproofing project, the water damage may spread to the next room at least, or leak downstairs at worst, causing serious losses to the home and neighbors.

There are many kinds of materials used for bathroom waterproofing, and basically all have good waterproofing effects. But you need to pay attention to specific construction details.

Bathroom floor

If you want to replace the bathroom floor tiles, after chiseling away the original floor tiles, you must first level the floor with cement mortar, and then perform waterproofing treatment. This can avoid leakage caused by uneven thickness of waterproof coating.

Painting at joints

The joints between bathroom walls and floors, as well as the joints between water pipes and the ground, are the places where problems are most likely to occur. During construction, workers must be urged to deal with these corners, and all waterproof coatings must be applied "in place."

Wall surface treatment

In general bathroom waterproofing treatment, waterproof coating about 30 cm high is also required on the wall to prevent water from seeping through the wall. But if the bathroom wall is a non-load-bearing light wall, the entire wall must be coated with waterproof coating. If your home uses a two-fan shower screen, the two connected walls must also be fully painted. If your home uses a bathtub, the height of the waterproof coating on the wall adjacent to the bathtub should be higher than the upper edge of the bathtub.

Reference: Baidu Encyclopedia-Interior Decoration