Explain the method of tying the hook.

The method of tying the fishhook is shown in the following figure:

Material preparation: fish hook, fish rope and scissors.

1. The fishing line passes through the hook.

2, as shown in the figure.

3. Turn it up and press two lines.

4. Go through the middle circle under those two lines, and then repeat this step.

5. Just go around 4 or 5 times.

6. Tighten the thread, and then cut off the excess thread head, leaving 1mm is enough.

Main features and colors of fishhooks:

1, main function

Firm: by firm, it means that the tensile strength of the hook is large and it is not easy to straighten, and the hook handle has the advantage of not falling off after binding. For example, the unique groove design, fertile soil and rich fertilizer are a good example. Pro: Pro means sharp hook tip and good puncture ability. The manual Yi Shi produced by Gamma Katz greatly improves the puncture ability.

Toughness: Toughness means that the fishhook has certain flexibility, which requires the carbon content of the steel used for the fishhook. When the carbon content is too high, the hook is fragile and will break when it encounters a slight torsional force. On the contrary, if the carbon content is too low, the tensile strength of the hook will be reduced and it will be easy to straighten. Therefore, the hook needs to undergo a rigorous toughness test.

Step 2 color

The common colors of fishhooks in the market are mainly white, black, gold, red, blue and black, and there are also many colors such as pink, dark green, purple, brown, copper and bronze. Except for black and brown, other colors are processed after electroplating white nickel, that is to say, the white hook is the basic hook. The black hook is a layer of black nickel plated on the white hook.