Camping nailing game

The camp nailing method is as follows:

Items: a rope and a camping nail.

1. Thread the rope through the camping nail.

2. Two ropes cross, turn around and come out from below.

3. Wear it three times in a row.

Then the line on the right comes down and crosses the line on the left.

5. Finally, put it in and tighten it.

Characteristics of camp nail knot:

The difference mainly lies in the different ways of adjustment. Camping nail knot is an adjustable knot used for pulling rope. Hook knot is also one of the changes of semi-knot, which is characterized by adjusting the length of rope through the movement of knot.

Other knotting purposes:

1. Ear-bearing method: Among them, ear-bearing method is a very common but practical and exquisite method. Generally used at the last end of the bracelet, the last two rope ends are handled together, which is both beautiful and can be fixed without slipping. After the final tightening, it needs to be ironed with a lighter, which will be more secure.

Second, the rabbit ear knot: the rabbit ear knot is often used to balance two ground anchors when climbing, and can also provide redundancy. Compared with many other double-loop knots, the rabbit ear knot is firm and safe, and the size of the rope loop can be easily adjusted by moving the rope from one ring to another. Each loop shares about 50% of the load. Any rope loop, any ground anchor and any mountaineering buckle are damaged, and the remaining ground anchor combinations cannot be used reluctantly.

Third, the figure-of-eight knot: In many cases, the figure-of-eight knot is a general knot, replacing the ordinary backhand knot. In sailing and rock climbing, the figure-eight knot is very important because it needs to prevent the device from falling off.