Can I decorate during the twelfth lunar month? Is it auspicious to decorate a house in the twelfth lunar month?
Many real estate projects are handed over at the end of every year. In order to move into their new homes as soon as possible, some people will decorate the houses as soon as they are handed over. So, can we decorate during the twelfth lunar month? Is it auspicious to decorate a house in the twelfth lunar month?
Can decoration be done during the twelfth lunar month?
Yes.
Although the weather is very cold in the twelfth lunar month, the quality of decoration materials is not bad now. They are cold-resistant and will not affect the quality problems. However, one thing to note is that during the twelfth lunar month, many decoration masters will have to prepare for the New Year. There will be a period of rest in between, that is, New Year's Eve decoration is required. At this time, you must grasp the decoration period.
When is the best time to decorate?
Most people would first choose spring when decorating a new house. This is a better time. For spring decoration, the air humidity is relatively low and the moisture content is also very moderate. If you choose to start construction during this season, try to choose materials with a relatively low moisture content. Generally, construction should be carried out when the weather is sunny. If it happens to rain, remember to prevent moisture. You can use plastic film to protect it. If you are in the south, there will be more rainy season, which is not very suitable for construction. Another point to note is that decoration companies are often the busiest in the spring. If there is a shortage of manpower that delays the construction period or the work is not meticulous, then the gain outweighs the loss. The owner can think carefully and strive to ensure the construction time and quality issues.
Precautions for decoration in the twelfth lunar month
Construction work must be "warm"
In winter, the temperature is low, and plastering, puttying, tiling, etc. will appear after being frozen. Problems such as empty drums. Especially when painting, you must pay attention to "keeping warm". Only after the paint is fully dry can you open doors and windows for ventilation, and do not let sand particles fall on the undried paint surface. Experts remind: Whether you are mixing mortar or spraying various coatings, it is best not to do construction in the open air.
Anti-dry and moisture-proof
During cold winter decoration, the impact on wood is mainly reflected in two aspects: temperature and humidity. If the temperature is too low or too high, it will cause adverse reactions of the wood, such as curling or even cracking. In particular, there are a wide variety of products from various companies in the current timber market, with varying quality. It is recommended that consumers choose some of the more well-known brands. In addition, home decoration experts from the service network remind that the main materials should be prepared in advance, and it is best to leave them indoors with heating equipment for 3 to 5 days so that the moisture content of the wood is close to the level inside the house to avoid deformation in the future. In addition, after the wood is transported to the decoration site, you should avoid placing it in a ventilated place, otherwise the internal moisture will be quickly lost during air drying and cracks will appear. When the humidity is low, reduce ventilation and place a basin of water near the heating facility to promote evaporation, so that the wood can survive the winter safely.
Seal oil on wood products in time
Wood in winter is prone to brittleness, and the cracks may not be visible at first. However, if the painter does not seal oil in time, it can easily cause damage to the veneer. The surface veneer is cracked, which affects the aesthetics and its service life. For the wooden wire used for edge closing, its moisture content is higher than that of the veneer. After processing, the surface must be sealed with oil as soon as possible, otherwise it will shrink and affect the appearance of the veneer.
Don’t forget the expansion joints on wooden floors
The air is dry in winter. When workers are laying wooden floors, expansion joints of about 2 mm are essential, otherwise bulging will easily occur in the future. , hanging phenomenon. If you encounter water leakage from the heater or water accumulation on the wooden floor, you must wipe it dry in time. Do not expose it directly to the sun or bake it with an electric stove to avoid drying too quickly and causing the floor to crack. To prevent deformation, the floors on both sides of the wall can be disassembled and reinstalled after the moisture has dissipated.
Save time by replacing exterior windows
Many families will replace ordinary windows or aluminum alloy windows with plastic steel windows during decoration. In order to save time, some installers fix the plastic steel windows on the ground. The feet are not very strong, which will cause the outer window to be deformed or tilted by the wind, making it difficult to push and pull to open it in the future. On rainy days, rainwater will flow into the room.