What should I do with the throttle after cleaning?

Matching means that the minimum closing angle of the throttle valve itself returns to the standard value after the throttle valve is cleaned. But the original compensation value is stored in the computer, so it is necessary to clear the storage of the computer and restore it to standard control data. Poor matching will lead to poor throttle responsiveness and high idle speed. In order to adjust the idle speed of the engine, control the fuel injection and adjust the shift point, the automobile throttle needs to be matched after cleaning. The specific steps are as follows: 1. Writing the actual throttle data into the computer board is called throttle matching. In order to input the state data into the throttle in real time, the computer must accurately identify the state of the throttle. When the throttle state changes, the computer will automatically adjust the throttle data value. If it exceeds a certain value, the engine works abnormally. At this time, it is necessary to clean the throttle valve, write the latest state data into the computer board and adjust the working mode of the computer board. 2. Throttle matching must be performed with a dedicated or universal decoder. According to the decoder prompt, clear the original data and identify the new data. 3. It is recommended to clean and maintain the throttle every 15000 km. After each cleaning, you need to learn to make the engine work at its best. If the throttle valve is not cleaned regularly, it may lead to abnormal idle speed, delayed shift, reduced acceleration and poor fuel consumption.