What's wrong with the Bora water pump without warm air?

There is no warm air in the Pacific car network. This situation is caused by the fact that the air in the system is not exhausted to form air resistance and the antifreeze is not circulating normally. You can go to the repair shop to remove the outlet pipe of the warm air tank and add coolant to vent it. Until the coolant flows out, you can go to the repair shop to check the emptying.

After installing the heating circulating pump, the temperature has not changed. What's the matter? Precautions for installation and use:

1. Before installation, check whether the inlet and outlet of the circulating pump are blocked by foreign objects;

2. Before loading into the system, the sundries in the system pipeline should be washed clean, so as to avoid blockage caused by sundries winding the impeller when the circulating pump is running;

3. When installing, use light force, and do not use excessive force to avoid damaging the pump body;

4. The inlet and outlet of the circulating pump should be equipped with any joints (loose joints) to facilitate assembly and disassembly.

5. Safe wiring, wiring should use a plug with three ground wires, and the ground wire end is connected with the motor shell to ensure safety.

6. The product has low noise. When checking whether it turns, you need to put a screwdriver to your ear and listen carefully.

7. The underwater rotating part of the pump is lubricated by water, so please don't run without water for a long time.

What is the high temperature of 202 1-05-30 heating circulating pump? 1, see if the temperature sensor is attached to the pipeline. 2. It may not rust for a long time. Open the drain cover and turn the spindle several times with a flat-head screwdriver. 3. Whether the circulating pump is electrified and the temperature set by the thermostat is too high.

202 1-05-30 heating circulating pump installed in the main water of the bathroom also has the same effect. I use a pipeline circulating pump in Korea, which works well and the price is acceptable. You can add a floor heating filter to the pipe connecting the water pump and the heating to solve the problem of impurities in the water. The high-temperature pump is at the water outlet and the low-temperature pump is at the water inlet. The power is the same, and the effect should be the same, with little influence. You have settings for temperature control, locations of key temperature sensors, and settings for start and stop temperatures. Qingdao Quancheng Paint can solve your worries. 202 1-05-30 What's the matter with the high temperature of domestic heating circulating pump? Find out the reason for the high temperature of the pump itself. If it is caused by high water temperature, check whether the return water temperature is too high if there is no problem in the installation position.

One is water shortage.

Second, it is suggested to find someone to check this situation as soon as possible. I think the loop is not set properly. Where should the domestic heating circulating pump be pressed? How to install it? Press it on the heating return pipe. The advantages of installing circulating pump on return pipe are:

1. The low water temperature in return pipe is beneficial to the life of the pump;

2. Filters must be installed on return pipe Road (in front of the water pump) and opened and dredged regularly.

The installation position of 202 1-05-30 heating circulating pump has been inquired by relevant personnel. If the heating in your home is connected in series, it should be installed in the last group. If it is parallel, which group is not hot, which group is installed. Hello, professional heating radiator manufacturers believe that you can't solve this problem yourself, including professional heating manufacturers. At present, we can only find a heating company, otherwise it is the only way. Although you have looked for the heating company many times, no one has checked, but only they can solve this problem. What a waste of snacks. Look for it more, it won't freeze!

202 1-05-30 installation position and price of heating circulating pump refers to the circulating liquid pump used to transport reaction, absorption, separation and absorption liquid regeneration in the device.