Can Bora's air conditioner heat?
When the engine water temperature reaches the standard temperature, turn on the air conditioner, press the ECON key and display the ECON character, and the air conditioner will enter the economic mode, that is, the compressor will not work. At this time, if you want the air conditioner to send warm air, press the heating button (the small red square ■), set the temperature to 2 1~24℃, and ensure that it is in the external circulation state (the symbol in the car has no circulation symbol). Then press the downward blowing button (↘) to let warm air blow on your feet. In this way, not only the front row can be heated, but also the rear row can blow warm air from the air outlet under the front seat, and the heating always evaporates upward, so the whole car will be very warm. If you want to increase the air volume, you can press the heating button (small red square ■) or the air volume increase button (↑); To reduce the air volume, press the cooling key (small green square ■) or the air volume reduction key (↓).
Heating in the above mode, because the compressor of the air conditioner does not operate, the air conditioner makes full use of the residual heat of the engine cooling system, so it basically does not increase the load of the engine, thus hardly affecting the fuel consumption. Of course, absolute zero energy consumption is unrealistic, because the fans in air conditioners, servo motors controlled by wind direction valves and other equipment will always increase energy consumption. But compared with the operation of the compressor, this is a very small energy consumption. Therefore, it is suggested that the above modes should be generally adopted in winter heating.
Forced rapid heating.
If you want to quickly increase the temperature inside the car in cold weather or when you just get on the bus, after turning on the air conditioner, press the temperature increase button (red square ■) continuously to display "HI" on the screen. At this point, the compressor will run and the warm air will be blown out immediately. After the engine water temperature reaches the standard temperature, you will feel that the air outlet of the air conditioner is very hot. This mode heats up quickly and the temperature is high, but it will increase fuel consumption.