China Naming Network - Company naming - How to arrange the socket for home decoration?

How to arrange the socket for home decoration?

(1) porch:

It is recommended to reserve at least one 1A five-hole socket to make plans for the purchase of dryers and other equipment.

(2) living room:

TV background wall: at least 3-4 1A dual-diode sockets (TVs and set-top boxes are usually secondary plugs) and at least 1 1A five-hole socket. It is suggested that the height should be .2m higher than the surface of the TV cabinet, and it should be hidden behind the TV as far as possible to avoid the unsightly appearance caused by the exposure of many lines. If you plan to purchase audio, projectors and other equipment, the number of sockets needs to be counted together.

near the sofa: it is recommended to configure 1A five-hole sockets on both sides. If possible, 1A five-hole sockets with USB can be installed, and the height is .3m from the renovated floor.

(3) Dining room:

Near the dining table: Two 1A five-hole sockets are also necessary, and it will be very convenient to cook hot pot or something.

sideboard or bar: two 1A five-hole sockets are installed respectively.

(4) Kitchen (key area):

Above the operation desk: It is recommended to install a large number of 1A five-hole sockets with switches. Specifically, it is necessary to contact the number and placement of electrical appliances (such as rice cookers, microwave ovens, electric ovens, bread makers, juicers, etc.). What needs to be emphasized again is the importance of the switch, which can not only ensure safety, but also be convenient to use. You don't have to unplug the plug repeatedly, just use the switch to complete the power on and off.

inside the cabinet under the sink: two 1A five-hole waterproof sockets with switches are reserved for kitchen treasures, water purifiers and other equipment.

other locations: as for the sockets of embedded dishwashers, disinfection cabinets, ovens or range hoods, 1A three-pole sockets are generally used; 1A three-pole socket with switch should be reserved in advance for gas water heater installation. The circuit of the refrigerator should be in another way, and the socket is 1A three-pole socket. It is recommended to set it at the side or rear of the refrigerator, and the appropriate height is .3m or 1.5m from the ground.

(5) Toilet:

Near the mirror of the washbasin: two 1A five-hole sockets (with splash box) are provided to facilitate the use of small household appliances such as hair dryers and razors;

near the toilet: it is recommended to configure 1A three-level socket with switch (with splash box) to plan for the intelligent toilet;

other locations: if the washing machine is placed in the bathroom, 1A three-pole switch socket (with splash box) should be reserved about 1.2m from the ground; The electric water heater should be about 1.5m away from the ground, and a 16A three-pole socket (with splash box) should be reserved. If the power is too small, a 1A three-pole socket should be used.

(6) Bedroom:

Bedside: 1-2 1A five-hole sockets are installed on both sides, and USB sockets can be installed if possible, which is convenient for charging mobile phones and plugging in desk lamps. It is necessary to plan according to the width of the bed and the position of the bedside table, otherwise it will be easily blocked behind the bed.

main wall: at least two 1A double-diode sockets and one 1A five-hole socket are installed to reserve TV, computer and other electrical appliances. Air-conditioning: Hang-up is often used, and 16A three-pole socket with switch is installed, which is generally about 1.8m from the ground, depending on the height of the air conditioner (the air conditioner is more than 15CM away from the ceiling), and a single air switch must be adopted for control.

(7) Balcony:

Arrange sockets according to personal needs. For example, a 1A three-pole socket (plus a splash box) is required for installing the washing machine, and at least one 1A five-hole socket is required for installing the vacuum cleaner charger in the future.

(8) study:

1A five-hole socket is installed on the wall; 1A five-hole socket with switch is installed on the writing desk or computer desk. If you need to install a computer socket or a telephone socket, you should arrange it according to the specific placement. It is worth noting that the interval between this kind of weak current socket and strong current socket should be at least .5m, so as to avoid that the strong current radiation will affect the weak current, resulting in unstable network and unclear TV picture.

(9) Other rooms:

If there are cloakrooms, storage rooms and other areas, about two 1A five-hole sockets should be reserved, which can be planned according to family life habits and furniture arrangement.

Extended information:

Precautions for installation:

1. The installation height of the socket shall be installed according to the design requirements when specified in the design; When the design is not clear, it should generally meet the following requirements: the socket with safety door is not less than .3M;; Socket without safety door is not lower than 1.8M. It is recommended to buy sockets with safety doors as much as possible, because the prices of the two are not much different.

2. A well-sealed waterproof and splash-proof socket should be used in the bathroom or other damp places. (Note: The socket with safety door is a plastic baffle in front of the metal reed of the jack on the basis of the general socket. Three hole socket, when the plug is inserted, the grounding pile head is inserted into the hole first, and the mechanism in the socket opens the other two hole doors. The two hole sockets must be inserted into the socket pile head at the same time before the safety door can be opened, so as to prevent young children from accidentally inserting metal objects and causing safety accidents. )

3. When the socket is installed, its panel should be straight and close to the wall. Moreover, the wiring (phase) should conform to: single-phase two-hole socket, the right hole or upper hole facing the socket is connected with the phase line (live wire), and the left hole or lower hole is connected with the zero line; Single-phase three hole socket, the right hole facing the socket is connected with the phase wire (L, live wire), the left hole is connected with the neutral wire (N), and the upper hole is connected with the ground wire (PE).