What are the installation positions of radiators at home?

At present, many northern families choose radiators for heating in winter. The radiator now is very different from before, with beautiful appearance and convenient installation. Where is the radiator installed? What we are talking about now is the common orientation. The specific placement position should be adapted to local conditions, and the owner's own decoration style and furniture placement should also be considered. Generally speaking, the general principle of radiator installation position is under the window, beside the window, out of the way and placed inward.

The reason why we choose under the window is to consider the principle of hot air. Installing a radiator under the window has two advantages: 1, because the radiator is close to the ground and can make all indoor air convection, so the room temperature is balanced; 2. Once the cold air comes in through the window gap, the radiator heats it, which plays a role in preventing cold and forms a certain barrier to the cold air.

If there is no window in the room, the living room with a height of 1.8 meters should be placed on the narrow walls on both sides of the sun, which saves space and is relatively reasonable and economical; If the bedroom uses a radiator with a height of 0.7 meters, it can be placed on the side wall. If you use a radiator with a height of 1.5 meters, you can put it on the side wall with windows in the bedroom. In addition, it should be noted that the steel radiator should not be placed too close, because the surface temperature of the steel radiator is high, and it may burn if it is too close.

How to install the household radiator?

Step 1: Slot the floor or wall. In order to bury the exposed pipeline, the construction team must slot the wall and the ground. The depth or width of the groove requires a special installer to collect the actual treatment.

Step 2: Lay the pipeline and protect the card slot. In the early stage, according to the position of radiator, the branch pipe can be laid by slotting, and the steel groove can be laid in the branch pipe to protect the pipeline according to the customer's demand. The system is closed and pressurized by water injection.

Step 3: Install the water collector. Water separator and water collector are water flow distribution and collection devices composed of water separator and water collector. The water separator should be installed horizontally and wiped clean after installation.

Step 4: Pressure test the radiator system. This is a very important step in radiator installation. The specific operation is to close the main pipe connecting valve, open the radiator inlet valve, and test with pressure testing equipment. The experimental pressure should be 1.5 times of the normal service pressure, and not less than the experimental pressure of the whole residential pipe network. 3-5 minutes without leakage is qualified.

Step 5: According to the renovation progress. Radiator construction should be carried out at the same time as hydropower construction, so as not to affect the construction progress.

Step 6: Install the radiator. Place the radiator smoothly, connect the valve joint with the inlet and outlet valves, measure whether the radiator is straight with a level meter and whether the pipeline installation meets the requirements, and then reinforce and tighten the joint with a pipe wrench.

Step 7: Install the suspended fireplace. The horizontal distance between wall-hung boiler and gas meter and gas stove should be greater than 300. There should be no open wires and electrical equipment above the wall-hung boiler, and the clear distance between the wall-hung boiler and electrical equipment should be greater than 300. Volatile dangerous goods such as explosives should not be placed near the wall-hung boiler. When installing, incline the flue downward by 2 or 3 to prevent condensed water from entering the wall-hung boiler.

Step 8: The customer checks and accepts the whole radiator system. Usually, when replacing the pipeline, workers will reserve the valve on the pipeline, and after installation, they will have to carry out a stamping test to prove that there is no place to run, run, drip or leak, so as to complete the acceptance.

Step 9: Install the radiator system. The whole radiator installation step is completed, and users can smoothly enter the use stage.

I would like to remind the owners that the radiator should not only consider its heat dissipation performance, but also pay attention to its decorative function. Generally speaking, the installation position is more behind the sofa in the living room or the bay window in the bedroom. These places usually belong to unused walls, and placing radiators in these places will not affect the layout of the home. In addition, if the radiator is placed reasonably, it can not only save indoor space, but also cooperate well with home decoration to achieve a good and harmonious decorative effect.