How to turn on the heater in Song Max in winter?
How to turn on the heater in Song Max in winter? How to turn on the heater in Song Max in winter? When you need to use the air conditioner to warm air, you only need to turn the air volume control knob, select a suitable air volume, and then increase the air conditioner temperature. When using the heating function of the air conditioner, you do not need to press the ac key. You only need to press the ac key when using the cooling function. The heating principle of the car air conditioner is very simple. After the heater is turned on, the high-temperature coolant in the engine will flow through the heater water tank. There is a blower behind the warm air water tank so that the air outlet can blow out warm air. Air conditioning control: The high-end version of BYD MAX can turn on the thermal air conditioning through the air conditioning adjustment system in the center control panel. Select the air temperature and switch the air cooling or heating effect. When the automatic air conditioning adjustment is selected, set the temperature higher, and then click the automatic button on the air conditioning adjustment panel to turn on the heating. Click the main aviation key icon to enter the air key interface, as shown in the figure below: 1 air related prompt information is displayed. 2/3 Select the blowing mode, namely blowing the face, blowing the feet, and defrosting. These three modes can be selected individually, in combination with each other, or simultaneously. 4 Click the ladder directly to select the wind speed. 5 displays the temperature zone. Turn on the sub-control, and the main driver and co-driver can control it separately. Turn off the secondary control and only adjust the main driver's temperature. The low-end version of BYD MAX can turn on the warm air by turning the temperature control knob on the air conditioning control panel in the high temperature direction. To check whether the MAX air conditioner is heated, you can first check: 1. Whether the air conditioner adjustment system is set correctly. 2 Check the water temperature gauge. If it's just starting to get cold, the engine temperature may not warm up before it rises. Check 3 whether the air filter element is too dirty. If the warm air is discharged normally after removing the air filter element, it means the air filter element is too dirty. If no abnormality is found in the above inspection, it may be a fault with the empty control panel or cooling system, then you should go to the after-sales service center for inspection. @2019