How to record songs with Cool Edit Pro

before recording, please make sure that COOLEDIT

PRO can run normally. Recording songs with cooledit: turn on the microphone switch before recording songs, and turn on it after running COOLEDIT

PRO: record the mixer (note: different sound cards are used in computers, so are the recording control adjustment panels). Just press the space bar. Play or stop (or use the play/stop button to control), in the pop-up dialog box. Select the microphone and adjust the microphone volume.

1: Click the multi-track/single-track switch button in the upper left corner to switch to the multi-track interface, right-click the waveform window of track 1

, and select Insert Audio File (insert your accompaniment), as shown below:

2: Prepare the microphone, adjust the microphone volume, and put on headphones. Press the R key on track 2, then press the record key, listen to the accompaniment in the earphone, and sing along with it (if only recording voice, the first step is omitted); If the recording is not satisfactory, you can right-click the waveform that has just been recorded: remove the sound block and re-record.

3: After singing, press the stop button (the processing of recording is ignored here), and click Edit/Mix to File/All Waveforms in the menu, as shown in the following figure

4: The software will start processing. After mixing, the software will automatically jump to the editing interface, and click File: Save as;

5: in the pop-up: save waveform as dialog box below: save type, find MP3PRO and select it. After naming it, just press the save button.

tip: save the file type according to your own needs, usually in MP3 format.

if you are satisfied with my answer, please adopt it in time!