China Naming Network - Company naming - How to solve the problem of the water tank temperature being too high

How to solve the problem of the water tank temperature being too high

The following methods can be used to prevent the water tank temperature from being too high:

The radiator should not be in contact with any acid, alkali or other corrosive properties.

Use soft water. Hard water needs to be softened before use to avoid clogging and scaling inside the radiator.

In order to avoid corrosion of the radiator, when using antifreeze, be sure to use long-lasting anti-rust antifreeze produced by regular manufacturers and in compliance with national standards.

When completely draining and refilling the radiator, turn on the water drain switch of the engine block first. When water flows out, close it again to avoid blisters.

In daily use, the water level should be checked at any time, and water should be added after stopping the machine to cool down. When adding water, slowly open the water tank cover and keep the body as far away from the water filling port as possible to prevent burns caused by high-pressure steam ejected from the water filling port.

In order to prevent core rupture caused by freezing in winter, such as long-term parking or indirect parking, the water tank cover and drain switch should be removed to drain all the water.

The effective environment of the spare radiator should be ventilated and dry.

Depending on the actual situation, the user should completely clean the radiator core once every 1 to 3 months. When cleaning, rinse sideways with clean water in the direction of the reverse air intake. Regular and complete cleaning can prevent the radiator core from being blocked by dirt, which will affect the heat dissipation performance and affect the service life of the radiator. :

When the water temperature is too high or even the pot is boiling, avoid the following practices:

Do not try to continue driving to avoid causing major machine damage.

Do not try to open the water tank cover, otherwise hot liquid may spurt out and cause burns.

Do not pour cold water into the engine block and cylinder head, as this may cause the cylinder to suddenly cool down. And burst

Reference: Baidu Encyclopedia---Car water tank