How to read the time and date of the watch?
From top to bottom, the small dial at the top shows the month, which is controlled by the first knob. Pull out the knob to adjust the month. The second watch handle has three functions: manual clockwise winding without pulling out; Pull out the first gear, you can adjust the week counterclockwise and the calendar clockwise.
The leftmost dial is located at nine o'clock, showing the day of the week. You can pull out the first knob to adjust it. At three o'clock, the rightmost dial shows the month. Pull out the third knob to adjust the month. The small dial at six o'clock in the middle shows 24 hours. There is a small window in the middle of the dial at three o'clock and six o'clock, which shows the calendar. Pull out the second knob to adjust the calendar and pull out the second knob to adjust the time.
The dial at twelve o'clock is the scoring dial, the dial at nine o'clock is the timing dial, and the dial at six o'clock is the second clock dial. The window at three o'clock shows the calendar. The first knob is a button, which has a timing function and can be started and paused. The third handle is also a button with time function, which can be restored to its original position. The second watch handle can adjust the date by pulling out one gear, and adjust the time by pulling out two gears.
Precautions for watches:
1, when wearing a watch, the sweat on your hands is corrosive to the case, so you should always wipe the case with a soft cloth. When you don't wear a watch, you should put a plastic watch stand on it.
2. Don't open the back cover of the watch at will to prevent dust from entering the movement and affecting the normal work of the watch. If you do this during the warranty period, it will affect the warranty service you should enjoy at the special maintenance point.
3. Don't put the watch in the wardrobe with mothballs, lest the watch oil go bad.
4. Don't put your watch on equipment with strong magnetic field, such as mobile phone, stereo, TV, etc. , so as not to be affected by magnetization.
5. Watches that are not worn for a long time should be wound regularly once a month; In this way, the parts will not be in a static state for a long time, thus ensuring the lubrication of the movement in the watch.
6. Ordinary mechanical watches are wet. You can press dry cotton on the watch and bake it with a light bulb for 5 minutes, so that all the water in the watch can be evaporated. For watches with severe moisture, the moisture absorption time can be appropriately extended.