China Naming Network - Company naming - What problems should be paid attention to in feng shui planning of factories and enterprises?

What problems should be paid attention to in feng shui planning of factories and enterprises?

There are two kinds of factory feng shui; One is to rent a factory and the other is to build a factory. In addition to the geographical location and geomantic environment of the factory, we should also consider the declining geomantic layout of the whole park and the location of the rented factory in the park. At present, most of the factories in the industrial park are built on the same mountain and in the same direction. Some of them did not invite geomantic survey when building the park, which led to the decline, and some of them were rented out to others for temporary storage. Therefore, before renting a house, you should know the layout of the park and factory buildings and the decline of the RMB. I. Geographical location and environment of factory site selection The factors to be considered in factory site selection mainly include the following aspects. 1, located in the urban area; This kind of factory is suitable for high-tech industries which are technology-intensive and capital-intensive, occupy a small area and have no noise, air and water pollution. Advantages are: convenient transportation, well-informed, easy to introduce talents and low transportation cost. Disadvantages are: high land and labor costs, many restrictions, easy to move because of urban planning and other reasons. 2. The site is located in the suburbs; This kind of site has the strongest applicability, has all the advantages of the downtown site, is also suitable for labor-intensive enterprises, and has low land and labor costs and relatively few restrictions, so it is an ideal site choice. 3. The location is in the countryside; There are many kinds of such venues, such as far away from cities, docks and railway stations, as well as roads, water supply and power supply, which should be analyzed differently. This kind of factory is suitable for labor-intensive and polluting industries. Advantages are: low land cost, low labor cost, close to raw material production, low requirements for workers' quality and easy recruitment. There are also many disadvantages: high sales and transportation costs, small amount of information, poor traffic conditions, frequent water and power outages, etc. The advantages and disadvantages of the above analysis are that geographically, it is not that the location with many disadvantages is not suitable for factory location, which depends on the nature of the factory. If the location of the city center has many advantages, but if your factory is a labor-intensive enterprise, it is not suitable. It is more suitable to arrange it outside the school or in the countryside. We should consider raw materials, labor supply, marketing, land use costs and investment environment. Whether the supply of raw materials is guaranteed, the freight rate is high or low, whether skilled workers or heavy manual workers needed for production can be recruited, and whether the market sales are favorable are all factors to be considered in the factory site selection. At the same time, whether the place suitable for your factory can buy or rent a suitable land plant and whether the land price and house price are reasonable are all important conditions that must be considered in site selection. There is also a very important premise, which is the investment environment (including hard environment and soft environment) where the site is located. Hard environment mainly refers to whether the traffic is convenient, whether the demand for electricity is guaranteed, and whether the water supply, water source and sewage discharge can meet the requirements. Soft environment mainly refers to whether the government attaches importance to it and provides a relaxed environment. For example, whether there are tax incentives, whether administrative fees have been cancelled or reduced, whether there are arbitrary charges and levies, whether the efficiency of government agencies is high or low, whether there is a bad habit of "eating and getting cards", and of course, whether the local folk customs are tough and the public security situation is good or bad. Second, the feng shui factor of factory location The fundamental purpose of factory location is nothing more than two points: First, whether the production can be carried out smoothly, whether the products are qualified, whether the output and sales volume are large, and whether it can make money. The second is to prevent accidents such as fires and work-related injuries. To achieve this goal, factory location is the first condition. In addition to the above three factors, feng shui is also an important aspect. Because a place has good feng shui, it means that the space-time atmosphere of this place is good, which can make decision makers keen, managers in good condition and producers concentrated. 3. The factory is located at Feng Shui Point 1. There is no straight road around the plant site, and the plant site is not in the "iron cage" plot surrounded by roads at the fork road, the anti-bow road or the middle of the fork road. Don't choose to be next to overpasses, large substations and towering electric towers. 2. Build a factory where there are no cemeteries and hospitals around the plant site. Graveyards and hospital sites are closely related to the dead, and the yin is too heavy. There are strong "grievances" in interrogation rooms, prisons and execution sites. As the saying goes, "Which yamen doesn't have a few ghosts who have died?" There is "suffocation" in the place where the front hall of God and the gate of yamen hedge. There are a lot of "malodorous gases" in landfills, sewage treatment plants, other gullies and sewage rivers, all of which are unclean places. If you set up a factory in such a place by mistake, some strange or unpredictable things may happen in the future and should be avoided. 3. The site is located where the wind gathers gas and the water surrounds the mountain. The mountains and water here are not necessarily true mountains and water, but rather true mountains and water. There should be mountains or buildings at the back, mountains or buildings at the left and right, and flat land in front to gather gas. There are many places that meet this requirement and you can choose. If it can't be fully satisfied, it can be made up vertically, and strengths and weaknesses can be avoided. As long as the above three items are met, the factory location is already a qualified site. Geomantic planning of the factory Geomantic planning and layout of the factory include the overall orientation of the factory, the location of the factory and the orientation of the gate; Tianyuan song Third, the cloud says, "Go to the first star to seek happiness, and come to the second door of life and death." This is a discussion about the yin house, which means that when standing in the direction, the most important thing is to stand in the upward direction of Wangxing, and the inlet and outlet should be consistent with the direction of the mountain. The most important thing for the couple to fly to the upward auspicious star is to inspect a factory and a workshop to see if it is prosperous. See if the direction of Wangcaixing is correct, and it is good to be prosperous. For example, the stars are transported upwards, which is the "two blacks" and "Huang Wu", which is the beginning of the dead; Second, it seems that the orientation of the water outlet and the water outlet is in line with the contract. If so, the factories in this park will undoubtedly prosper. If not, it will also reduce the prosperity. To sum up, the most important thing in the orientation of modern industrial parks is to grasp three aspects: 1 and inspection. Cause and effect can be the true mountain or the direction of the mountain, or the building behind it. The first mountain dragon is characterized as Xiushan in the form of alloy, wood, water, fire and earth. Such as oblique flying, broken face, lifting skirt, dancing sleeves, throwing stones, etc. If you see the fierce mountain above, you are not qualified. The city takes high-rise buildings as mountains, and the high-rise buildings behind it are square, and there are no grotesque triangles and knives rushing to the factory. 2. Click on the compass in the community and make a dragon with needles. It seems that the dragon is He Long. Factory orientation should be consistent with the context. At the beginning, the dragon was Tianyuan dragon, so it was clean and clear. 3. Look at the nozzle; The nozzle includes upward water and an inlet and an outlet. When standing, it depends on whether the upward water is in harmony with the direction of the standing mountain. 4. Vertical direction; If the sitting orientation decided by Lailong and Shuikou is looking at the mountain and countryside or Binxing Xianghui, and the outdoor landscape can match, then this sitting orientation can be established. The 8th National Games, Wangshan Wang Xiang 14 Bureau, Shuangxing Club 8 Bureau ***22 Bureau are all good, Shuangxing Club can sit, mountains and rivers can cooperate, and they can stand upright.