What's the matter with idle motors of Mitsubishi Cheetah always buried?

The idle motor is used to control the idle speed ratio of the vehicle. If there is a problem or damage, it will endanger the idle running of the engine. Vehicles may have difficulties in driving, unstable idle speed, idle vibration, idle fire and slow acceleration, and must be repaired or replaced immediately.

The common faults of idle motor are mostly caused by carbon and dust. Because the idle motor controls the total flow of idle gas and is connected with the electronic throttle, it is easy to cause carbon deposition and a large amount of ash deposition after a period of use, which will endanger the accurate operation of the idle motor.

At this time, it needs to be cleaned. Remove the idle motor and spray carburetor cleaner. It is important to note that the idle motor is a high-precision component. When cleaning, the cone head of the motor must face down, then spray cleaning agent on the cone head and part of the waterproof shell, and then wipe it clean with a rag, which can also prevent the cleaning agent from spraying into the motor and causing damage.

Changfeng Cheetah is a brand of Changfeng Group, headquartered in Changsha City, Hunan Province. Digestion and absorption by introducing Mitsubishi Pajero off-road vehicle technology. The model adopts super four-wheel drive system, which has strong dynamic performance, good riding performance and low fuel consumption. The company has four vehicle production bases in Yongzhou, Hunan, Chuzhou, Anhui, Changsha, Hunan and Jingmen, Hubei.

Idle motor is an element to control the idle speed of automobile. When the engine is idling, it is called idling.

When idling, the cross-sectional area of idle air passage is changed according to the temperature and load of the engine, so that the engine has the best idle speed under different working conditions.

Idle motor is mainly used to bear the idle speed of the car, and its purpose is to adjust the idle speed according to the engine load when idling. Idle stepper motor is installed on the throttle body and used by the engine controller to control the idle speed of the engine. When the engine speed deviates from the idle speed, it is adjusted by the throttle valve to control the amount of air entering the intake manifold, which is mechanically operated by the accelerator pedal wire rope.