Illustration of how to tie the hook
Tools/raw materials: ruler, scissors, No.3 gold sleeve hook, 2.0 main line, 1.0 auxiliary line, 8-shaped ring (with connecting ring).
1. Cut five threads with scissors, each about 15cm long.
2. Tie a fishhook on each thread with internal thread knot method for standby. If you can't tie the hook, you can buy a ready-made split hook directly from the fishing gear shop and cut the split line in the middle for later use. Tie the hook to the rope.
3. Intercept the main line 100cm for standby.
4. Tie a secondary thread and a main thread with a fishhook, and make a circle to prepare a knot. The node is about 20cm away from the short end of the main line, and the node is about 5cm away from the hook end of the secondary line.
5. Thread the long end of the main line and the end of the secondary line without the fishhook in the coil for three or four times and tighten it, and cut off the redundant secondary line ends. The distance between the node and the short end of the main line is 20cm. Winding the main line and the auxiliary line into a circle, passing the long end of the main line and the non-fishhook end of the auxiliary line through the coil for three or four times, and tightening.
6. Repeat step 5 at a distance of12cm to form a second node. Note that in order to prevent adjacent hooks from hanging together, it is necessary to ensure that the distance between two adjacent nodes is greater than the total length of two adjacent sub-lines. The distance between two nodes is greater than the total length of two adjacent sub-lines.
7. Repeat steps 5 and 6 to form a new node and connect all five sub-lines to the main line.
8. Fold one end of the main line through the splayed ring into a circle, pass the folded end through the coil, then pass the splayed ring through the folded end, adjust the distance between the splayed ring and the adjacent nodes to 10cm, tighten the thread ends and cut off the redundant thread ends. One end of the main line is folded in half through the 8-shaped ring, and the folded end passes through the coil. Pass the figure-eight ring through the folded end. Tighten.
9. Repeat step 8 to fix the figure-eight ring at the other end of the main line.
10. Connect the lead pendant with the fishing rod main line with the connecting rings on the 8-shaped rings at both ends of the main line. Note that in order to prevent the secondary line from winding with the main line, the lead pendant must be hung at the other end of the secondary line.