How to heat Toyota Corolla air conditioner?
The heating mode of Corolla air conditioner is to adjust the cycle mode of the car to the cycle in the car, and it is not necessary to turn on the air conditioner (that is, the AC switch), because the heating is generated by the thermal cycle of the car itself, which will save fuel. It is not advisable to turn on the warm air immediately after the car starts, wait for about 3 to 5 minutes, and then turn on the warm air when the water temperature rises to normal temperature, that is, when the water temperature rises to the middle. The length, width and height of Corolla are 4635mm, 1780mm and 1455mm respectively, and the wheelbase is 2700mm. The car is equipped with ABS anti-lock, braking force distribution system, brake assist system, body stability control system and lane departure warning system.
The method of manually turning on the Toyota Corolla heater is as follows: find the air-conditioning panel near the vehicle center console, find the temperature adjustment button on the air-conditioning panel, and operate the temperature setting knob in the air-conditioning temperature button upward to raise the temperature and downward to lower the temperature. Turn off the "A/C" switch, and the system will blow natural wind or hot air.