Pile winding skills of two-wheeled motorcycle

The skills of two-wheeled motorcycle winding piles are as follows:

1. The engine can move slowly without turning off the throttle; Route, next to the first pile, before the drill pipe starts, the driver also needs to relax his spirit and muscles, and his legs naturally clamp the body. After starting around the pile, it is necessary to understand the angle and speed of the pole. If the angle is too large or the speed is too fast, the car body will not have enough steering space and will be pressed to the width limit line.

Try to look ahead, don't look at the ground. The correct way is to choose the first or second gear to enter from the middle position between the sideline and the benchmark. After entering, it is necessary to properly cooperate with the oil distribution and try to maintain a semi-linkage state, so as to cut off the power output in time and make corresponding adjustments. Come on, be gentle. When you find that the position of the vehicle is not in line with your expectations, the brakes can't be tightened at once.

Try to stay around that pile of things. The handlebar near the pile is 5 to 10 cm away from the pile. After the car passes, the handlebar on the other side should try to keep this distance when approaching the next pile.

4. If the speed is too fast, you can also slow down by braking after the point. Try not to kill the direction when winding the pile, the car is easy to fall down and the foot is easy to land.

Even if the car is really going to fall down, don't be afraid. With a little clutch and a little throttle, the car will get up. (especially the last pile, which can be saved); Before the exam, listen carefully to the examiner's explanation, where to enter and where to leave, and the driving route must not be wrong;