Beaded tissue box tutorial video
1. Starting from the bottom, cut a 6 # nylon thread with a length of about 4 meters and pass through the four beads, that is, the length of the left and right threads is about 2 meters.
2. Grab the thread with your left hand. Grab the thread with your right hand and wrap it around the front (from right to left). After winding, put it back on the last bead of the original right hand (from right to left). After it comes out, tighten it with both hands (reminder: the contact point of the two threads should be pulled to the center of the inner hole of the bead, so that the bead will be fixed very firmly).
3. Next, wear one on your left hand and two on your right hand. The right hand line goes from the back of the left hand line to the front (from right to left), and then returns to the last bead on the original right hand side. The next steps are the same as steps 2 and 3. First, put the beads on, then turn them back and tighten them, and so on.
After putting on the tenth group, you will start to bend over at this time. No beads on the left hand, three beads on the right hand. The action is the same as the second and fifth steps. Wear the last of the three beads of the right hand after the right hand thread passes around the left hand. Put it on and tighten it. After turning around, practice the same as steps 4 and 5, with one left hand and two right hands.
5. Next, wear four groups by analogy. After wearing it, start to turn, don't wear beads in your left hand, wear three in your right hand, and then continue to wear another vertical edge at the bottom. The wearing method is the same as the previous step 4. After wearing it, start to turn, and then continue to make a horizontal edge. So all four sides are done.
6. Prepare the connector. The left-hand line passes through the top bead on the vertical side, and the right-hand line passes through two beads. Then the threading method is the same as the fifth step. After wearing it, tighten your hands so that the first layer at the bottom will be fine.
7. start to expand the bottom. The left-handed thread directly passes through the inner hole of the vertical ball along the direction marked by the blue line in my drawing. The right hand line passes through three beads and goes out from behind the left hand line just passed through. Then go back to the last of the three beads in the right hand, and then tighten the left and right hands.
8. Next, put two beads on your right hand. The wearing method is the same as the second step, except that your left hand is empty in the second step. In this step, the right hand directly passes through the back of the line between the two beads just passed by the left hand, then puts on the last of the two beads in the right hand, and then tightens the hands.
9. After weaving the vertical edge, weave the horizontal edge, thread the left hand thread and thread the right hand thread with three beads, as in the fourth step. Reminder: From the second lap of the bottom edge to the completion of the whole box knitting, the left hand thread no longer wears beads, and the right hand thread wears beads, which plays a fixed role.
10. The other two vertical edges and the horizontal edge with the bottom spread are knitted on both sides of the box. Reminder: The basic method of threading beads can be seen in the second and fifth steps. Next, you can wear three beads on your right hand. When you start wearing both sides of the box, you will see the color matching.
1 1. Go on, wear a red bead on your right hand first, and then a white bead. Then, by analogy, your right hand will wear two beads. When it is red, you will become a red bead. When to change to red beads, you can look at the position of the beads in the picture, and then change to colored beads.
12. So the first layer on the side of the box is woven. When you get to the seam of the first layer, you only need to wear a bead on your right hand and then knit it according to the basic threading method. The second layer on the side of the box is made in exactly the same way as the first layer. There are five layers on the side of the box, and the other four layers are exactly the same as the first layer, as long as you pay attention to the change of the pattern.
13. After putting five layers, the top is ready. The top first layer is the same as the five layers on the side of the box. Put on three beads on the right hand line first, and the order is two white and one green. The left hand thread passes through the inner hole of the last row of beads in the fifth layer on the side in turn.
14. Next, put two beads on your right hand and weave them forward in turn. When the top first layer is woven into the corner. Just wear a bead on the right hand thread. The thread wears in the same way as the basic thread. After wearing it, the upper corner is fixed.
15. After turning the top first layer, continue to wear two beads on your right hand and knit forward. At the end of the first layer, the knitting method of the left-handed thread is exactly the same as that of the first layer, and then the edge-closing operation at the top is started. Next, continue to thread two beads on the right hand thread (according to the basic threading method), and only thread one bead on the right hand thread when the vertical edge is to be turned.
16. Then don't wear beads when you turn. Next, as in step 28, two wires pass through the inner holes of the beads on the horizontal side. When there are two beads left in the rotation, the right hand thread starts to wear two beads. The right hand thread passes through two beads in turn, and can be put back and tightened at the end, and the redundant thread can be cut off.