How to connect Wuling Hong Guang taillight line?

1. Make sure that the wires at the back of the harness are not short-circuited, especially the ground wire. First, connect the ground wire of the tail light on one side (for example, the right side) with the ground wire in the harness (this wire is black in the car and can also be measured by a multimeter);

2. Then turn on the key and turn the turn signal switch to the right. Use the test lamp or the rear taillight to find the line that can make the light bulb shine (the turn signal is flashing), and then use the found line to touch the live wire in the rear taillight respectively. When the right rear turn signal is on, connect this line and wrap it.

3. Turn off the turn signal and turn on the small light. The same is true for connecting and wrapping small lights; Find out the brake lights and backup lights in turn; If there is a rear fog lamp, it is necessary to connect the rear fog lamp;

4. It should be noted that when the small light is turned on, the fog light will not be turned on until the rear fog light switch is turned on. The left lights can be connected in the same way or at the same time, but when connecting the left turn signal, turn the turn signal switch to the left.