How to fix the bedside mobile phone bracket?
1. Choose a smooth wall or bedside table beside the bed and fix the suction cup base. Make sure that the suction cup is pressed to the vertical direction of the fixing surface, and then press the pressing block to fix the suction cup on the wall.
2. After the sucker is adsorbed, install the bracket through the hole. Usually, the bedside mobile phone bracket has two holes, one for adsorbing front objects such as desktop and the other for adsorbing side objects such as walls.
3. Adjust the tightness of the knob to stably support mobile phones and tablets with different weights, and then push the bedside bracket to adjust it to your own angle.
In addition to the suction cup installation method, there is also a clip type, that is, a clip at the end of the bedside bracket can be clamped on the headboard or table. That fixing method is easier and can be clamped directly, but the fixing effect may not be as good as that of the sucker.
Expanding knowledge: how to use clothes hangers as mobile phone brackets
1. Hang two hangers upside down in the gap between the headboard and the wall, and the function of using two hangers will be more firm. Then take two hangers, hook the hangers behind the headboard respectively, and let the top ends of the two hangers buckle together. Repeat the previous step with another hook and connect the bottom ends of the two hooks together to form a stable triangular structure.
2. Hook the vertex of the first triangular structure with a hanger, and then connect the hanger with the bottom of the triangular structure with two hangers to form a square structure. The heads of two clothes hangers hook each other, so that a square structure becomes four triangular structures.
3. Hang the mobile phone or tablet computer on the hanger, and a DIY bedside mobile phone bracket will be ready. You can also adjust the angle by adjusting the number of hangers, which is very convenient.