How to take out ps watermark and use it
1. Extract watermark with PS
First copy a complete watermark, then move the watermark above the watermark to be removed and change the layer blending mode below; Step 1: After opening the image, use the selection tool (here we use the polygonal lasso tool) to select a complete watermark (the reason why this picture is simple to operate is because there is a complete watermark available) as shown in the picture: Step 2: Press CTRL+J Create a new layer for the () watermark just selected with the Polygonal Lasso Tool. We can move it so that it is clearer, as shown in the figure: Step 3: Place the watermark on the layer Set the combination mode to: Color Dodge; as shown in the figure: Step 4: Press CTRL+I to invert the layer, then move the watermark layer to align it with the watermark on the base map; continue to copy the watermark layer and align all The watermark of the base map can be perfectly removed by using the watermark of the base map. Although it is a little troublesome, the effect is really amazing without any flaws; (note that the inverted watermark layer must be aligned with the watermark of the base map) to get the final result Effect.
2. How to remove the watermark from a picture
Method/steps
Today I used the most popular picture processing software PS to process a simple watermarked picture. picture. Of course, these methods can also be used for complex watermarks, but it requires careful operation in multiple steps to succeed.
First open the ps software, click on the file, and select open in the pop-up menu.
Then open a watermarked image in Explorer. Just click on the image and select Open.
As shown in the picture, there is a watermark in the lower left corner of this beautiful fruit picture. Although it is not big, it greatly affects the overall beauty of the picture. We just want to remove it. Then use the left mouse button to click on the Spot Healing Tool in the left toolbar.
After clicking this tool, start dragging against the watermark until the dragged shadow completely covers the watermark. Be careful not to adjust the spot repair tool too high, otherwise the effect will be affected.
As shown in the picture, after dragging the tool to cover all the watermarks, release the mouse, and the picture will be processed like this. It should be said that it is harmless to do so. But there are still relatively obvious flaws. As shown in the picture, a fruit has turned into a pattern with obvious edges and corners. We still need to continue to modify it. We still use this tool to enlarge the picture and find the irregular places in the picture. Click a few times until the image becomes regular, regular lines.
7
Of course, there are more and better ways to remove watermarks. I just used a relatively simple tool to do this here. In fact, the most important thing to remove watermarks is Simple and effective, doesn't require so many troublesome steps.
3. How to use photoshop to remove the watermark as shown below
The formula has its uses, practice is the most important, first remove the text content of the watermark, and use the stamp and smudge tools to process it manually Next, after covering the text, use the pen tool to cut out the outline of the character, right-click to add a selection, adjust the color difference and contrast, and after processing the character, invert the selection to process the environment. The characters and background are processed in the same way. The tone you made is almost complete, just cover the text content
If you want to take out the watermark, select the outline of the watermark and drag it to another layer, and process it slowly. The watermark on the picture is Adjusting the transparency means that the original watermark is 100% opaque. Use the pen tool to cut it out, add a selection and directly fill it with the corresponding color and it will be removed. Only by comprehensively applying tools can you achieve good results, and you still need to be skilled in technology.
4. How to use PS to make watermarks
1. First generate a "definition pattern"; 2. Write a text description on the definition pattern; 3. Fill it into your own work . There are only three of them in one game. A smart person can basically learn them in five minutes. A less sophisticated person like me can finish them in twenty minutes.
Next, let’s talk about the production process in detail.
1. Define a "definition pattern", that is, you must first prepare a piece of manuscript paper. For example, I wrote "Do not reprint original works of the Tang Dynasty National Day". I used PS. CS version, start the first step: open the PS software, click "File" in the interface, after the drop-down menu appears, click "New", set the "Width" and "Height" in the dialog box to "200" Pixel value, and then select the "Transparent" option from the right drop-down menu of "Background Content". After clicking "OK", the first step of the manuscript paper task is completed.
2. After taking the manuscript paper, you select "T" on the toolbar on the left side of the PS interface, that is, click on the icon "T", which is equivalent to taking out a pen. This " "T" is the text tool of PS. Move it to your manuscript paper, drag it, and a rectangular box will appear. You can start inputting text in it, including Wubi Pinyin. For example, input "Linghu Chong". Pay attention to the font you input: , size, position, angle, font size, etc. can all be controlled through the upper strips. Determine it after it is done. How to determine it? Just point the mouse to the "lock" pattern of the "Selection Tool" and then "click". That is the one on the leftmost toolbar. At this point, your text no longer has a moving dotted line.
Click the "Edit" drop-down menu to find "Define Pattern", and a dialog box will appear. You can give it a name as you like. After selecting it, click "OK" and this step is completed. At this point, your anti-counterfeiting mark is finally completed under your own personal supervision!
3. After you have the watermark, you can open a picture at will and "fill" the picture with the watermark you just created. Note: This step is: open any picture, and then find the "Layer" drop-down menu above. The first one is "New". Move to the right in the "New" command, find "Layer" and click it without any modification. Then click "OK" directly. Another way is to find the new layer symbol in the lower right corner and click directly. In the second step, click "Edit", find "Fill", and select "Custom Pattern" in the drop-down dialog box on the right side of the dialog box. The last one is the watermark you just made, select it. Click "OK" and your watermark will immediately be all over the image.
The last step: Find the layer toolbar in the lower right corner and adjust the "Opacity". There is a small arrow on the right side. After clicking, a slide bar will appear. Move it left and right until you are satisfied with the depth.