How to remove the rear axle clamp of tractor

According to the inquiry website, the following is the disassembly method of tractor rear axle plate:

1. Tire removal: First, put the tractor tire on the tire jack, and remove the tire screw with a wrench or screwdriver to complete tire removal.

2. Dismantle the spokes: loosen the nuts of the tractor spokes with a wrench, and then gently tap them with a hammer. After the spokes are gradually loosened, they can be removed.

3. Dismantle the bearing: open the oil port to remove impurities, then remove the bearing nut with a wrench, then clean the bearing with a paint brush, and finally remove the bearing.

4. Dismantle the transmission shaft: To disassemble the transmission shaft, you need to clamp the brake with a brake spring to prevent the transmission shaft from sliding. Remove the drive shaft nut with a wrench, tap the drive shaft to loosen it gradually, and then remove the drive shaft.

5. Dismantle the gear: tap the gear lightly to loosen it gradually, then remove the gear nut with a wrench, and then remove the gear.