How to make a swan with 100 triangles?
How to insert the triangle swan base? Isn't there a particularly prominent corner? Just aim at the protruding corner of the socket.
How to make a triangular winged swan A triangular winged swan is a two-winged swan. You can see it has two wings, very beautiful.
first step
It is the same as any triangle interpolation, so you need to prepare enough triangle interpolation. To complete this tutorial, you need to use 1502 triangle interpolation models, including 1322 white ones and 180 pink ones. Of course, you can also make it entirely out of white paper. If you have any questions about making the basic triangle plug module, you can refer to the introduction and tutorial of 3D origami.
Introduction and course of 3D origami
(1) First, fold the rectangular paper in half on the long side.
(2) Then fold the left and right parts in half, and then restore them, leaving a crease.
(3) Then, fold the upper left corner 45 degrees toward the center line.
(4) Rotate the lower left corner upward by 45 degrees.
(5) Then fold the two trapeziums in the lower half upwards.
(6) Fold the left and right parts in half as shown by the arrow.
(7) this is done.
Second step
First, the modules are basically assembled, usually in groups of three, and two triangular plugs are inserted into one triangular plug.
Third step
A circle can consist of 30 triangles. You need 60 to complete two laps here.
Fourth step
Continue to expand the circle of the kit, and the effect obtained after completing 5 circles needs to use 150 triangles.
Step five
Completed 10 lap. At this time, you can set up an origami triangle model similar to a stadium made by inserting triangles.
Step 6
You can stop at 15 lap. Then you need to be the key part of the swan.
Step 7
In the process of making, it needs to be divided into three parts: neck, tail and wing. First, determine the position of the neck. First, insert six triangular plugs, two sides of which are pink.
Step 8
Keep inserting upward to achieve the effect of upward arrow (∧).
Step 9
Next, the tail is made, which is similar to the neck, except that the number of triangular plugs used at the beginning is four, of which the two sides are pink, and the position corresponds to the position of the neck.
Step 10
Next, make wings on both sides, which are similar to the neck and tail, except that the number of triangular plugs used is 10, and the two sides are pink, that is, the eight newly added triangular plugs in the middle are white.
Step 1 1
Wings near the tail need to be added. At first, it is necessary to deal with the existing wing triangle plug "base", that is, it is necessary to "cover" the triangle of an additional triangle plug at the edge, and the white triangle plug covers half of the pink triangle plug. In the next operation, in order to make the wings spread out in parallel and have pink edges, it is necessary to constantly use pink triangular plugs to "cover".
Step 12
According to the above operation, start to add trigonometric interpolation upwards, and still use 10 trigonometric interpolation for each layer.
Step 13
Notice how the edges are handled.
Step 14
The wings on both sides keep rising upwards in the same way 10 layer.
Step 15
After making it to a certain height, abandon the method adopted in step 1 1 and start to reduce the use of one triangular plug on each floor, and then make it into ten floors.
Step 16
The effect of opening the tail is completely different from that from the neck.
Step 17
Now that the first part of the Triangle Swan has been completed, it is ready to enter the second part of the Triangle Swan. In the previous production, 770 triangular plugs were used.
Step 18
Next, make the base to make the swan with triangular plug more stable. Using white glue, insert the triangular plugs into the swan base respectively.
Step 19
After the front one is dry, insert a triangular plug on it for beauty and further stability, and fix it with white glue at the same time.
Step 20
Next, the second part of Triangle Swan was officially produced, just like the original production. Two triangular circles are made, and a total of 20 triangles are used, and each circle uses 10 triangles.
Step 2 1
On the seventh lap, put the triangle on it.
Step 22
On the eighth lap, I noticed that the position of the pink triangle was just corresponding.
Step 23
Next, we need to use a new way to operate triangle insertion: add another circle of triangle insertion, and the pink part is missing a triangle insertion, which is a total of two triangles.
Step 24
Each part uses two triangles to create this effect.
Step 25
Just lift it three times, and then gradually reduce the number of triangular plugs.
Step 26
Increase the number of turns of the triangle to the eleventh turn.
Step 27
Constantly improve until the final cap!
Step 28
Next, make the third part. First, make two triangular plugs. A total of 12 triangular plugs are used, and 6 triangular plugs are used in each circle.
Step 29
Go to the sixth turn to splice the triangular plug.
Step 30
From this time on, the number of triangles per circle will decrease.
Step 3 1
Until the triangle finally reaches the vertex.
Step 32
Put different parts of three triangular swans together.
Step 33
Put the medium-sized part in the largest part.
Step 34
Then put the smallest part into the large and medium-sized model assembled in the previous step.
Step 35
Starting from the neck of the largest model, continue to insert triangle interpolation upwards, and pay attention to the number of triangles used per beat. Generally, the combination of three triangles and four triangles rises.
Step 36
After reaching the appropriate height, the production is completed.
Excuse me, how does triangular origami form the territory of swan? The triangle does not form a circle, but stands upright, with the tips of the two heads facing outward and arranged in a row.
If it's a bigger swan
At least 40 triangles. . This is the first step.
Then insert the second row of triangles alternately, that is, connect those in the first row together, and then connect the two ends. I don't know if you understand, but just insert a triangle in the second row, cover two in the first row, one on the left and one on the right, and then connect them in a staggered way. Finally, circles are end to end.
This is the base. If you keep inserting it, the circle will naturally arch up. This is the belly of the swan ~
How many colored paper triangles did you make in "Proud"? What does it mean to be complacent in all directions? Please send a picture to see ~
Customize a paradise lyrics song title: customize a paradise.
Singers: Anita Mui&You Hongming & Ekin Cheng & Wallace Chung & Gigi Lai & Donna & Zhang Xiuqing & Huang Wei Ming &; Jenny Wang & Carina Lau&Ku Kuiji & Peng Jiahui & Hacken Lee&Wu Zongxian & Delphine Tsai & Li Feihui & Che Yuanyuan & Qiu Haizheng & Jordan chan & Chen Meifeng & Andy Lau & Happy 543&Xue.
Album: Creating a Paradise.
Create a paradise.
Write lyrics and compose music.
Birds fly freely in the blue sky (Ekin Cheng)
Fish roam freely in the sea (Li Feihui)
Is there a heaven in your heart (Carina Lau)
Can you tell me what it looks like (Delphine Tsai)
There are always too many challenges in this world (Wu Zongxian)
Where is my shelter (Hacken Lee)
Create a paradise with my love (Andy Lau)
Create an ideal with your heart (Peng Jiahui)
Have your dreams and all my hopes (Donna)
It is my paradise and my home (Jordan chan+Xue)
Beautiful flowers in full bloom (Wallace Chung)
Melodious songs echoed in my ears (Zhang Xiuqing)
Heaven in my heart (Chen Meifeng)
Waiting for you, waiting for me to share (Gigi Lai)
Life can sometimes be confusing (yellow)
Where is my stop (You Hongming+Che Yuanyuan)
Where did you park ~ Ya (Xue)
Create a paradise with my love (Anita Mui)
Create an ideal with your heart (Qiu Haizheng)
Have your dreams and all my hopes (Ku Kuiji)
It is my paradise and my home.
Create a paradise with my love (Andy Lau) (Create a paradise with my love) (Donna)
Use my heart to build an ideal.
Have your dream and all my hopes (dreams ~) (Qiu Haizheng)
There is my paradise, my home (Andy Lau).
Create a paradise with my love (Andy Lau) (Create a paradise with love) (Andy Lau)
Create an ideal with your heart (Tan Xiaohuan) (your ideal and my ideal) (Peng Jiahui)
Have your dream and all my hopes (together) (dream and all my hopes) (Peng Jiahui)
There is my paradise, my home (Anita Mui) (he) (Oh ~) (Wu Zongxian).
Create a paradise with my lover (Che Yuanyuan)
Build an ideal with my heart (together) (for you and me) (Hacken Lee)
Have your dreams and all my hopes (Delphine Tsai) (Ah ~) (Hacken Lee)
There is my paradise, my home ~ (You Hongming) (Wu ~) (King Jenny)
Make a heaven with my love (together) (Wu ~ ahhh) (Jenny Wang)
Create an ideal with your heart.
Have your dream and all my hopes (together) (have your dream ~ oh) (Li Feihui)
There is my paradise and my home (together) (your paradise and my home) (Zhang Xiuqing).
Create a paradise with my love (together) (Create a paradise with my love) (Happy 543)
Create an ideal (harmony) (an ideal) (happiness 543) with my heart.
Have your dream and all my hopes (together) (have your dream) (Huang) (Wu ~) (Happy 543)
It is my paradise and my home.
:music.baidu./song/24727986
Make weather forecast in English. Hello everyone! Welcome to the weather forecast.
The weather in Beijing is sunny, with the highest temperature of 10 degrees Celsius and the lowest temperature of 2 degrees Celsius.
There is snow in Toronto, and the temperature is between-10 degrees Celsius and -4 degrees Celsius.
Hello everyone! Welcome to the weather forecast.
The weather in Beijing is sunny, with the highest temperature of 10 degrees Celsius and the lowest temperature of 2 degrees Celsius.
The weather in Toronto is snowy, and the temperature is-10 degrees and -4 degrees Celsius.
How to be a genius? Genius is born. If you want to work side by side with genius, you must work hard!
In other words, a genius is a piece of waste if he doesn't work hard!
How to make an equilateral triangle with the radius of the circle as the radius, a point on the circle as the center and two points intersecting the original circle as the circle; Make the diameter of the original circle pass through the selected point and intersect with the original circle at the third point; The three points obtained are the three vertices of the triangle.
How to make a three-dimensional triangle?