How to install the inlet pipe and outlet pipe of water pump

The installation of the inlet pipe and outlet pipe of domestic water pump can adopt the following methods.

1. First, install the sucker of the oil suction pump.

2. Then install the plug of the suction pump.

3. Then install the rotary duckbill of the suction pump.

4. Then install the air inlet pipe of the suction pump.

5. Install the water pump regulating valve on the intake pipe.

6. Then install the telescopic pipe, so as to install the water inlet pipe and water outlet pipe of the water pump.

Extended data:

Matters needing attention when operating the water pump are as follows:

1, contact security guards, electricians and instrument workers to check whether the equipment is normal.

2, manual pump, flexible rotor rotation.

3, open the pump cooling water valve.

4. The lubricating oil level is normal.

5, pump inlet connected tower, liquid level is normal, to prevent time.

6, open the full intake valve, open the pump body and intake pipe exhaust valve for exhaust.

7. Start the motor and open the outlet valve after the pressure is normal.

8. Observe whether the pressure and current are within the specified range.

9, cryogenic pump start is to open the cooling pump pipeline, when the pump is completely cooled rear can start, running pump and standby pump cooling pipeline are in an open state.