Installation position diagram of bedside lamp
Installation position diagram of bedside lamp. Nowadays, many bedrooms are decorated with bedside lamps, and bedside wall lamps are one of them, which has gradually become fashionable. The position of bedside lamp is very important, and the most important thing is convenience. Below is the installation location map of bedside lamp.
Installation position of bedside lamp 1 1. The bedside lamp should be higher than the sitting position.
If we have the habit of reading while sleeping, we need to pay attention to making the nursing scope of bedside lamp slightly higher than our sitting position and lying position. If the height of the lamp is the same as or slightly lower than that of a person lying in bed, the light can't directly hit the book, which is easy to make the eyes feel uncomfortable.
2. Thread ends need to be reserved during installation.
Bedside lamps are generally installed at the bedside, or one on each side, but wire ends should be reserved before decoration. If not, don't choose to install them. Because the wall lamp is often installed in the middle of the wall, if there is no hidden line, it is necessary to pull the bright line, which affects the aesthetic feeling of the whole wall.
3. The switch should be within reach.
No matter what kind of bedside lamp is installed, it is necessary to consider whether the lamp is easy to switch and adjust. However, the placement and installation positions of different types of lamps are different, which should be determined according to the lamps you choose. If you can't reach out and touch it, then when you are sleepy, adjust the bedside lamp again and you will be sleepy!
4, energy-saving lamps are not dimmable
Energy-saving lamps are low-energy lamps, which will save electricity compared with ordinary light bulbs. If you reuse energy-saving lamps and change the light efficiency frequently, it will affect the service life of lamps, so it is more appropriate to choose ordinary bulbs for bedside lamps.
Installation position of bedside lamp Figure 2 What is the embedded height of bedside lamp?
The height of the bedside lamp, it is best to lean against the bedside, and the light can be directly concentrated on the reading materials, so as not to hurt the eyes, and you can also lean against the bedside to read. At the same time, when installing the bedroom bedside lamp indoors, it is best to keep the height of the bedside lamp parallel to the bed, so that there will be no reflection when reading.
The standard height of general bedside lamp should be about 1.5~ 1.8m from the ground. If it is out of the wall, the distance from the wall is 10cm~40cm. If the height of the bed is 45cm and the height of the mattress is 90cm, then the height of the bedside lamp will exceed 90cm and be installed above the bedside table.
Installation position diagram of bedside lamp
Generally speaking, the installation height of bedside wall lamp depends on the actual situation. Before installation, it is necessary to measure the height of the bed and bedside table, and install according to the size of the occupants, and finally determine the height of the lamp. The wall lamp installed in this way will be more harmonious and meet the needs of the human body. The bedside lamp can be installed too high, which has poor focusing effect and poor lighting effect. The installation height of bedside lamp should not be too low, which is easy for residents to hit or burn. Too strong light will irritate eyes and be bad for eyesight.
When installing the bedside lamp, we should also pay attention to the selection and determination of the circuit, switch and light source of the bedside lamp, as follows:
1, the bedside lamp should be higher than the sitting position: because if the height of the desk lamp is the same as or slightly lower than the height of you lying in bed, the light can't directly shine on the book when reading, which is easy to make your eyes feel uncomfortable. Therefore, for reading, we can not only raise the position of the bedside lamp, but also install a dimmable wall lamp on the background wall of the bedside.
2. When choosing a wall lamp, you must reserve a thread: the installation position of the wall lamp is generally above the bedside, or a double-headed wall lamp in the middle, or one on each side, but it needs to be reminded that if no thread is reserved on the wall before decoration, it is best not to choose a wall lamp for bedside lighting. Because the wall lamp is often installed in the middle of the wall, there is no hidden wire, so it is necessary to pull a wire on the wall according to the position of the wall lamp, so the smooth wall is not beautiful.
3. bedside lamp switch should be within reach: because different types of lamps are placed and installed in different positions, a slender floor lamp should be erected by the bedside, a European table lamp should be placed on the bedside table of walnut, or a small wall lamp should be installed on the bedside wall. If you can't reach the switch of the bedside lamp when you are lying down, you will have to make great efforts to find the switch or adjust the brightness when you are sleepy and want to turn off the light. In this way, I'm afraid there's not much sleep left for you.
4, energy-saving lamps are not dimmable: because energy-saving lamps themselves are low-energy lamps, they save more electricity than ordinary light bulbs. If the energy-saving lamp is used as dimmable light again, the service life of the energy-saving lamp will be shortened due to the frequent change of light efficiency. Therefore, when you want to choose an adjustable light source, it is advisable to buy an ordinary light bulb.
Installation location of bedside lamp Figure 3 1. What feng shui is important about bedside lamp?
1, shape
The feng shui quality of bedside lamp will affect people's fortune. For example, classical lamps are unpretentious, have the function of a town house, are helpful to people's career, and can create a classical charm, while fashionable and novel crystal lamps have the function of urging money, so try to avoid triangular or prominent lamps in modeling.
Step 2 color
The color of the bedside lamp can be determined according to the owner's life. For example, the owner's favorite "Yang" color is yellow, so the lamps can be mainly yellow, which can produce a strong magnetic field. It is forbidden to use red light, because red has flashing decoration, which will make people upset.
3. Quantity
If the bedroom bedside lamp uses spotlights or downlights, then the number of installation is also very particular. In order to avoid violating the bedroom geomantic omen, it is forbidden to choose three spotlights or downlights to set side by side, which is similar to three wick incense, which is very unlucky and easy to lead to bad luck.
4. Style
In geomantic omen, the bedside lamp with classical charm has the function of town house, which is conducive to promoting the development of the owner's career and creating a more elegant sleeping atmosphere. The fashionable and exquisite crystal bedside lamp has the function of promoting wealth, and you can choose the right bedside lamp according to the bedroom style.
Second, what are the five taboos of bedside lamps?
1, the so-called bedside lamp is generally located at the bedside of the bedroom, and in Feng Shui, it is considered that the placement of the bedside lamp is also very important for us. If the bedside lamp is set too low, it will affect our sleep quality, which is not conducive to our sleep and relaxation. Therefore, the bedside lamp should not be put too low, but should be placed in a high and low position above the first class.
2. In addition, the bedside lamp can't point directly at the top of the head. After all, light shining on the top of the head will not only have a dazzling feeling, but also cause a sense of oppression, which is not conducive to our career development, and it is easy to affect the feng shui atmosphere in the bedroom and even affect our physical and mental health.
3. In addition, don't choose red light for bedside lamp. Although red is traditionally a festive color in China, it is easy to bring people fidgety mood, especially for some lovers and lovers. Using a red light in the bedroom can easily lead to quarrels between the two parties, which is not conducive to the relationship between husband and wife.
Finally, the size of bedside lamp should also pay attention to feng shui. When choosing the size of the bedside lamp, we should consider the size of the bedroom area, which conforms to the size of the bedroom space area and the overall decoration style of the bedroom. We can't just choose according to our personal preferences.
5. Avoid choosing bedside lamps with sharp corners. On the one hand, it is prone to accidents such as bumping, on the other hand, it is also easy to destroy the bedroom feng shui and affect the harmony between husband and wife.