Where is the bedside lamp socket?
Where should I put the bedside lamp socket? Bedside lamps are needed for local lighting and can also beautify the room. It can be said that the bedside lamp is a combination of ordinary lighting, local lighting and decorative lighting. So, where do you put the bedside lamp socket?
Where should I put the bedside lamp socket? 1 To determine the number and location of switches and sockets, we should first consider three aspects:
First, the future function of each space. For example, determine the master bedroom, children's room, study and so on.
Second, the approximate location and size of major electrical appliances and furniture. Television, washing machine, cupboard, etc.
Third, the use habits of family members. For example, if you like to eat hot pot and drink kung fu tea at home, you should leave a socket on the dining table or a grounding plug under the table.
Total number of sockets in each space:
1. Master bedroom: two bedside lamps, air conditioner, cable TV, floor lamp, mobile phone and other digital products are charged.
2, the second bedroom: roughly the same as the master bedroom, can be slightly reduced.
3. study room: computer host, monitor, WiFi, stereo, air conditioner, desk lamp, charging and other small household appliances.
4. Living room: TV, set-top box, stereo, water dispenser, air conditioner, floor lamp, mobile phone charging beside sofa, etc.
5。 Toilet: washing machine, hair dryer, electric water heater, intelligent toilet, etc.
6. Kitchen: refrigerator, range hood, microwave oven, oven, rice cooker, induction cooker, soymilk machine, water purifier, dishwasher, garbage disposal, etc. This is the place with the highest utilization rate of sockets, and it will be increased or decreased according to the actual situation.
7. Balcony: According to the function of the balcony, lighting switches and standby switches are appropriately added.
Where is the bedside lamp socket? 2 About the position of switch and socket:
1, the power switch is generally between 1.2m and 1.4m from the ground (normal switch height and adult shoulder height) and installed at the same height.
2。 When multiple switches are installed side by side, their positions should correspond to the functions of each switch. For example, the electrical appliance on the left should correspond to the leftmost switch.
3. Ordinary power sockets are installed at 0.3m on the ground with the same height.
4, audio-visual equipment, desk lamps, wiring boards and other wall sockets are generally 0.3-0.6m from the ground (the living room sockets are subject to TV cabinets and sofas).
5. The washing machine socket is 1.2m ~ 1.5m from the ground.
6. The refrigerator socket is 0.3m or 1.5m from the ground (depending on the location and size of the refrigerator).
7. The air conditioner, exhaust fan and other sockets are 1.9m to 2.0m from the ground.
8. The socket of the electric water heater should be installed on the right side of the water heater, which is 1.4 to 1.5 meters from the ground, and should not be located above the electric water heater. The water heater is bulky and will block the socket.
9. The balcony socket should be above 1.4m from the ground, and try to avoid the influence of sun and rain.
Where is the bedside lamp socket? Three points for attention in the installation of bedside lamp
1, the bedside lamp is higher than the sitting position.
Because if the height of the desk lamp is the same as or slightly lower than the height of you lying in bed, it is easy to make your eyes uncomfortable because the light can't shine directly on the book when reading. Therefore, for reading, we can not only raise the position of the bedside lamp, but also install a dimmable wall lamp on the background wall of the bedside.
2, choose the wall lamp must be reserved wire head.
The installation position of the wall lamp is generally above the bedside, or a double-headed wall lamp in the middle, or one on each side, but it needs to be reminded that if there is no reserved thread on the wall before decoration, it is best not to choose the wall lamp for bedside lighting. Because the wall lamp is often installed in the middle of the wall, there is no hidden wire, so it is necessary to pull a wire on the wall according to the position of the wall lamp, so the smooth wall is not beautiful.
3. The bedside lamp switch should be within reach.
Because different types of lamps are placed and installed in different positions, either a slender floor lamp is erected at the bedside, or a European table lamp is placed on the walnut bedside table, or a small wall lamp is installed on the wall of the bed. If you can't reach the switch of the bedside lamp when you are lying down, you will have to make great efforts to find the switch or adjust the brightness when you are sleepy and want to turn off the light. In this way, I'm afraid there's not much sleep left for you.
4, energy-saving lamps are not dimmable
Because the energy-saving lamp itself is a low-energy lamp, it saves more electricity than ordinary light bulbs. If the energy-saving lamp is used as dimmable light again, the service life of the energy-saving lamp will be shortened due to the frequent change of light efficiency. Therefore, when you want to choose an adjustable light source, it is advisable to buy an ordinary light bulb.