China Naming Network - Baby naming - Complete set of toilet size standards

Complete set of toilet size standards

Toilet is a very common sanitary ware in the bathroom. Of course, the toilet is not only one size. There are many sizes of toilets, and the distances of pits of different sizes are also different. Of course, it is difficult for people who make toilets for the first time to know the size and pit distance of toilets. Next, I will bring you some instructions about the size of the toilet. Let's have a look.

A, the size of the toilet and pit spacing

1. Toilet size

The toilet size in the market is usually 30cm-50cm, which is the standard width of the toilet size, and the height is not very important. The standard is about 70 cm, the length is about 70 cm and the size is about 62 cm. It is the standard in the industry. These are based on the user's bathroom size and toilet size. In addition, the user must measure the sewage discharge of the toilet at the same time, which has a great influence on the installation of the toilet. Usually the size of the drain pipe is between 30 cm and 40 cm, or between 35 cm. These are all ways to measure the size of the toilet.

2. Toilet pit size

Pit spacing refers to the distance between the partition walls of the toilet sewer pipe, generally 300mm, 350mm, 400mm, 450mm, etc. Choose the right toilet first. According to the type of toilet and personal preference, the distance from the toilet pit is the positioning size of the toilet drain pipe. It is normal to choose a pit spacing of 300mm or 400 mm in the bathroom. In actual operation, 20 mm is reserved and the spacing between wall tiles is 20 mm. Then the actual distance from the center line of the toilet drainage pipe (diameter 1 10) to the wall is 320mm or 420 mm. The actual error is 10mm, provided that it can be installed normally.

Second, how to install the toilet

1. Take out the pipe plug from the floor drain, check whether there are sundries in the pipeline, and clean around the pipeline. Align the toilet outlet pipe with the sewer pipe, place it horizontally, mark the bolt hole of the toilet, and then remove the toilet.

2. Insert a hole with a diameter of 20mm and a depth of 60mm at the mark, insert a bolt with a diameter of 10mm in the hole, bond it with cement, and put the toilet hole on the bolt to make it match the mark. Move the toilet after the exam. Open. Apply putty around the toilet outlet and sewer outlet, then align the four bolt holes of the toilet horizontally with the bolts, put the rubber pad on the bolts, tighten the nuts, and then tighten them to a moderate tension.

3. Aim at the center of the back end of the toilet, draw a vertical line, draw a horizontal line at a height of 800 mm from the ground, and draw a mark on the horizontal line according to the position of the holes on both sides. On the back of the can, a diameter of 30mm and a depth of 70mm were formed at the printing hole. Cave. Insert a bolt with a diameter of 10 mm and a length of 100 mm into the hole and bond it with cement.

4. Hang the rear water tank on the bolt and lay it flat. Especially aim at the center of the toilet. Put the rubber pad on the bolt and tighten the nut.

5. When installing the elbow of the water tank, first remove the nuts of the rear water tank and the water inlet of the toilet, then put them on the elbow back to back, and put a rubber pad on the water pipe. Insert the upper end of the sewer elbow into the drain pipe of the rear water tank and the lower end into the toilet inlet, push the rubber pad into the nozzle, tighten the nut, straighten the elbow and tighten it with pliers. Medium.

6. When connecting water with the splayed door, measure the opening size of the water tank drift door first, match the threaded joint and install the splayed door. Break the copper pipe or plastic pipe, and then put the drift door and the open door nut back into the copper pipe or plastic pipe. Both ends of the pipe are wrapped with asbestos rope or lead oil and thin rope, respectively inserted into the entrance of drawer door and splayed door, and the nuts are tightened.

That's the introduction we brought to you about the size of the toilet.