Gutter sink installation method

The installation method is as follows:

1. Draw a horizontal line on the installation position to determine the starting and ending positions of the installation.

2. Place the gutter sink smoothly on the ground or scaffolding, and use a cutting machine to cut a hole matching the drain outlet at the appropriate location under the sink.

3. Slowly insert the drain bucket into the sink and make sure it is in the correct drain position.

4. Install the hanger on the sink, insert and fix it according to the specified spacing. The distance between adjacent hangers is 40~45 cm.

5. Use an electric drill and a No. 6 drill bit to drill holes at intervals of 40 to 45 cm at the spring line position, and tap the expansion tube into the hole.

6. Place the sink at the spring line position, adjust the distance between the hangers, and use 4X40 stainless steel dart wire to fix the hanger and the sink.

7. If you encounter a corner of the sink, use a snap connector to connect the male and female corners, and use a snap connector to connect the connection between the sink and the sink.

8. During the installation process, in order to prevent water leakage, glass glue and PVC glue must be applied to the corresponding accessories such as locks and connectors.