How to debug the booster regulating gas of Sundyne lng vehicle-mounted gas cylinder

Debugging methods for pressurization and pressure regulation of Sundyne lng vehicle-mounted gas cylinders are as follows:

1, first check whether the components such as gas cylinders and pipelines are in good condition, and whether there is any leakage or damage.

2. Open the valve of the gas cylinder, inject gas into the system, and confirm that the gas path is unblocked.

3. Insert the booster regulator plug into the ignition socket of the automobile to ensure normal power supply.

4. Adjust the pressure gauge on the booster regulator to display the target pressure. Under appropriate conditions, it can be adjusted by rotating the handle or pressing the button.

5. Put the vehicle into gear to accelerate the start, and observe the change of natural gas pressure. If the pressure does not meet the standard, the supercharger regulator needs to be readjusted.

6. Finally, close the cylinder valve and spark plug, and check whether the gas path is clear again before the vehicle runs.