How does Audi a6 throttle match the computer?

Audi a6 throttle is computer matched. Start the car first, the water temperature is above 80 degrees, open the key door, and match from the basic setting to 63 points, and the match will be successful if 63 points are displayed.

After the automobile accelerator is cleaned, it should be initialized according to the disassembly procedure. After the throttle is cleaned, it needs to be initialized, because the computer has a memory function when adjusting the throttle opening, because there was sludge blockage before. In order to ensure the air intake, the computer will automatically adjust the throttle opening to keep the air intake in a normal state.

When cleaning the automobile throttle, it is not necessary to disassemble it, but it is necessary to clean the sealing part of the inlet steam, and the idle motor must be disassembled for cleaning. There are advantages and disadvantages of cleaning and disassembly-free methods for fuel injectors to prevent other unnecessary waste. The sealing ring or other gasket needs to be replaced after disassembly, or oil leakage occurs during disassembly and assembly.

The electronic throttle mainly uses the throttle position sensor to control the throttle opening according to the energy required by the engine, so as to adjust the intake air. (Photo/Text/Photo: Xu Shuanghe) @20 19