How to deal with the floor drain turning?

Turn of floor drain means that the drain pipe needs to turn to guide the water flow to another pipe or drain. It is very common in building construction and decoration, but if the floor drain is not handled properly, it will easily lead to poor drainage or water leakage, which will affect the quality of life and health.

The following are precautions for floor drain turning treatment:

1. Choose a suitable floor drain: choose a floor drain that matches the room size and water flow to ensure normal drainage.

2. The bending radius should be as large as possible: the larger the bending radius, the smaller the impact on the water flow, and it is not easy to slow down or even block the water flow.

3. Use elastic materials at the corners: elastic materials can be used at the corners to make the turning smoother and will not be blocked by the unevenness of the surface.

4. Oblique drainage: The horizontal drainage pipeline is installed obliquely, so that the drainage is faster, and the water flow is prevented from slowing down or even flowing backwards when turning.

5. Reasonable arrangement of drainage pipes: Try to avoid multiple bends, and try to use T-joints or Y-joints for drainage pipes in different directions, which can better scour the internal organs and dirt of the pipes.

Finally, it should be noted that when installing the drainage pipeline, the construction must be carried out in strict accordance with the relevant national regulations and standards, and it is not possible to piece together and adjust it by itself, so as to avoid potential safety hazards and future maintenance problems. At the same time, attention should be paid to cleaning and maintaining the drainage pipeline on time to avoid aging or damage at the corner, resulting in poor drainage or water leakage.