How to turn on the heater in Volkswagen Polo air conditioner

There are several steps to turn on the heater.

The first step: start the car. Starting the car without ignition can easily burn the circuit. Also, don’t turn on the heater immediately after getting in the car, because most of the time you need to turn on the heater is when the surroundings are colder, and the water tank temperature in the car will be higher at this time. Low, the air sent is also cold air, and this is not very friendly to the engine. Doing this frequently will also affect its service life.

Step 2: Turn on the external air circulation. After the air in the car has been replaced, turn off the external circulation and enable the internal circulation. This process takes a few minutes. The one with the car logo and an arrow is the air circulation system, and the outer circulation is the button with the arrow pointing from outside the car to the inside.

Turn left|Turn right

Please click to enter the picture description

Please click to enter the picture description

Step 3: Find For the knob with the AC logo, turn the temperature to 25° or above. Some of the knobs do not display the temperature but are distinguished by red and blue. Then turn to the red part and the warm air will start. The car will get hot after a while.

Turn left | Turn right

But there are a few things to note. When turning on the heater, you must close the windows, otherwise the temperature will escape from the window and the temperature inside the car will It can't rise for half a day, so don't turn on the A/C button, it will make it even colder.