Can floor paint be done in rainy days?

I can't. The floor paint is epoxy resin. Hardener is added during construction, and then it is coated on the floor to start curing. This process can't be wet or wet, otherwise the curing is not complete. There will be bubbles, lines and poor strength. It is best not to construct in rainy days. Winter is usually before 4 pm. Hao Qiang Floor will answer your questions. The construction of epoxy floor is greatly influenced by the weather, and temperature and humidity are important factors affecting the quality of floor construction. For example, if the problem is too high and too low, the material reaction is not sufficient, and the floor will turn white and blister if the humidity is too high, so the builder wants to ask how to construct it in rainy days, so as not to affect the quality of the floor and the construction progress. The following is a detailed introduction of Xinyue Floor Xiaobian for everyone. If the ground can't dry normally because of rainy weather, mechanical drying can be used. The most suitable construction weather for epoxy floor paint is proper wind, the temperature is about 20℃, and the epoxy floor needs to be constructed in 2~3 processes. We must ensure that the materials in each process are completely dry before proceeding to the next process.

On rainy days, the air pressure is generally low. At this time, it is easy to leave a lot of harmful substances in the construction of epoxy floor paint, which are not volatile. Therefore, it is suggested to open the doors and windows of the construction site and do a good job of indoor ventilation, which can not only speed up the mobility of indoor air, but also ensure the health of construction workers. Protective measures should be taken around epoxy floor paint in rainy days, and industrial dehumidifiers should be prepared for the minimum construction. If the air is wet, the ground will also be affected. If epoxy floor paint is directly painted on such wet ground, it is easy to cause the floor to warp. Therefore, before construction, the ground must be dry, and the areas adjacent to dry and wet areas can be treated by zoning. On rainy days, epoxy floor paint tends to turn white. In this weather, there will be water vapor on the wall and the ground, and the materials on it are not easy to dry. If the putty is not completely dry, a series of coating defects and even cracks will appear in the next construction. Therefore, it is necessary to ensure that the materials in each process are completely dried before proceeding to the next layer. Or adding a proper amount of whitening water-adjusting agent into the material can also accelerate the drying of the coating. The moisture content in the air, that is, humidity, can be measured by a hygrometer. Generally, the humidity of epoxy floor paint during construction is below 85%. It is easy to affect the curing of the coating because of the high humidity in rainy days. At the same time, water mist is easy to turn white on the surface of epoxy floor, which affects its use effect! Secondly, in rainy weather, the temperature is low, and the two-component epoxy floor can only be used because it must be mixed, which easily leads to insufficient mixing of the main agent and curing agent and reduces the construction quality of the floor.