How to treat several circuits of floor heating distributor

The floor heating pipe distributor, also called water separator, is usually under the cupboard. Look at the following pairs of supply and return interfaces, which are several loops. In general, a bedroom has a cycle, a living room has a dining room. If it has been installed, count several entrances and exits, one entrance and one exit, which is a loop.

The floor heating distributor and water collector refer to the devices used to connect the main heating pipeline and return pipe in the floor heating system. The floor heating water separator is a water distribution and water collection device used to connect the supply and return water of each heating pipeline in the water system. Its main functions are boosting, depressurizing, stabilizing and shunting.

Extended data:

Use skills of floor heating water separator

1. The water separator can control the water supply flow of each room or area in different ways. For example, if any rotary core valve on the water separator is half closed, the temperature of the water heating chamber will decrease.

The second is the manual exhaust valve on the water separator. In the case of poor heating and gas blockage in winter heating, users can use the exhaust device to manually exhaust the gas in the floor heating pipeline to ensure the normal circulation of hot water.

There is a filter at the front end of the oil-water separator. During the annual heating period, users will remove the filter screen at the lower end of the filter regularly or irregularly, and then install it after cleaning to ensure the cleanliness of the water pipe. Rinse the pipe network with clean water after heating.

Fourth, if you are not at home for a long time, you can turn down the circulating water with the main valve of the water separator, and you must not turn it off completely. If there is no indoor heating all winter, the water in the pipeline will be blown out.

References:

Baidu encyclopedia-floor heating water separator