Precautions for ground decoration epoxy floor paint construction process
When we decorate the house, the floor occupies a relatively large area, so when we decorate the house, we will choose to focus on decorating the floor. There are many things to pay attention to when decorating the floor. , so what are they? And it’s not just indoor floors, but also public places. So what is the construction process of epoxy floor paint? Let us introduce it to you next!
1. Construction process of epoxy floor paint
1. Treatment of the base layer of epoxy floor paint: Polish the loose layer, delamination and cement residue of the epoxy floor paint to make it hard and Smooth and increase the adhesion between the floor coating and the ground. Primer coating construction: Immediately after mixing is completed, pour the material onto the treated base layer and spread it evenly and slowly to reach the required thickness. Be careful not to over-operate. After preparing the epoxy sealing primer, apply it with a roller, scraper or brush to fully wet the concrete and penetrate into the inner layer of the concrete.
2. During the mid-coat construction, visually inspect the surface of the quartz sand layer after polishing to ensure that the floor is wear-resistant, pressure-resistant, free of collision, water, mineral oil, acid and alkali solutions, etc. And adjust the ground flatness. Use quartz powder and epoxy floor paint as the middle coating, stir it evenly and scrape it evenly. This method is mainly used to enhance the smoothness of the ground. After drying, any pitted surfaces or cracks should be repaired first, then sanded with a flat sander to make them smooth, and vacuumed clean. This pass can make the ground smoother and make it easier to find defects that still exist on the ground for leveling construction of the next surface layer.
3. After the middle layer of the floor paint construction surface layer has dried, apply the epoxy floor surface layer using flat coating. If Party A first installs and debugs the equipment after the intermediate coating is dry, causing new defects on the ground, it should be leveled and polished with batch scrapers, and the surface layer should be applied after vacuuming and cleaning. Use the prepared epoxy resin, filter it, and spread it evenly on the mid-coat layer with a trowel to form a bright-colored self-leveling epoxy resin floor.
2. Precautions for floor decoration
1. If you use paint roller coating, use a roller or a special sprayer to spray the construction. The roller should be evenly applied on the ground vertically and horizontally, and try to avoid the roller coating. If there is debris or lint on the roller, you can use tape to remove the easy-to-remove wool before using the roller.
2. It is better to use light-colored ceramic tiles on the floor of the bathroom: The bathroom is a place where filth is excreted, and it is also a hiding place for "villains". It is better to use light-colored ceramic tiles for the floor. It is not suitable to use bright red, Gold and other fire colors can avoid making dirty things "fire", and can also make the bathroom look cleaner, brighter and drier, which is consistent with the rules of Feng Shui.
3. Apply with even force, and be careful not to miss the brush; when applying the two coats before and after, maintain a vertical intersecting angle to fully cover the area; a single application should not be too thick, especially at the mouth of the tube and At the corners, it should not exceed 1mm to prevent cracks from occurring after drying.
4. The entrance floor is a frequently used place in the home. Therefore, the material of the entrance floor should be wear-resistant and easy to clean. The decoration of the floor usually depends on the specific conditions of the overall decoration style. Commonly used floor laying materials include glass, wooden floor, stone or floor tiles, etc. If you want the entrance area to be different from the living room, you can choose to lay floor tiles in a different color from the living room. You can also raise the floor of the entrance hall and make a small slope at the connection with the living room to highlight the special status of the entrance hall.
Okay, the above is what the editor has brought to you about the precautions for ground decoration and a brief introduction to the epoxy floor paint construction process. After reading the article, you will have some questions about the above. Do you understand the contents?