How to clean large crystal lamps

How to clean a large crystal lamp

How to clean a large crystal lamp? As a kind of lamp, crystal lamp has advantages that other lighting cannot match in creating a luxurious atmosphere. With the development of society, crystal lamps are constantly improving in shape, color, and function. Here is how to clean a large crystal lamp. How to clean a large crystal lamp 1

How to clean a crystal lamp without removing it

< p> 1. The simplest cleaning method is to wipe it carefully with a rag, and use a convenient ladder to climb up and clean it carefully.

2. To clean the crystal lamp beads, use a soft cloth dipped in water diluted with detergent and gently wipe the front and back of the crystal beads. Do not hold the beads and pull them down when wiping.

3. When wiping the bracket accessories, do not touch the soft cloth with water, especially alcohol, to avoid scratching the protective film outside the electroplating layer and affecting the brightness of the surface of the crystal lamp bracket accessories.

How to clean large crystal lamps

1. Prepare some tools for cleaning lamps: lighting cleaning agent, high-temperature steam spray gun, herringbone ladder, hair dryer.

2. This time the large lamps will be cleaned using a more professional high-temperature steam spray gun, and then dried with a hair dryer.

4. Then inject clean water and lighting special cleaning agent into the high-temperature steam spray gun.

5. When cleaning the crystal lamp, press the button on the spray head to turn on the switch, then gently turn the adjusting valve knob according to work needs to adjust the size of the mist droplets, and then turn the speed regulator knob. button to adjust the spray speed and distance.

6. Spray high-temperature steam spray evenly to all parts of the crystal lamp to increase the rapid decontamination and degreasing effect of the cleaning agent.

7. After cleaning with high-temperature steam spray, we switched to a hair dryer to dry the surface of the lamp. Be careful not to get too close to the lamp to avoid damaging it due to excessive heat.

8. Then turn on the power and test whether the lamp is abnormal (whether the lamp is turned on normally). If there is no problem, you can call it a day.

9. Finally, clean up the clean site and clean and maintain the large crystal lamp. How to clean large crystal lamps 2

How to clean crystal lamps

1. Lay down waterproof floor mats or water-receiving objects. If you need to use a herringbone ladder, put it in a good position.

2. Prepare all equipment, tools, and cleaning agents and place them in place.

3. Take out the high-temperature steam spray gun, press down on the steam safety cover, and rotate it counterclockwise to open it.

4. Inject less than 350ml of clean water. (Note: It is strictly forbidden to fill the container with water before use.) Tighten it clockwise.

5. Plug the power cord into the 220V AC socket and preheat it for 5-8 minutes to make sure it is easy to use during cleaning.

6. Remove the volume cover of the particle injector. Pour the special cleaning agent into the capacity cap according to the amount used to clean the crystal lamp.

7. Add the cleaning agent in the capacity cap into the particle injector and close the capacity cap tightly. Close the regulating valve before filling in cleaning agent. Do not load the diluted cleaning agent beyond the maximum capacity of the box 5L.

8. Connect the microparticle injector to the 220V power supply. To ensure the atomization effect, the motor speed range has been limited at the factory. Please do not disassemble it and change it without authorization.

9. Carry the particle injector on your shoulder, hold the injection pipe with one hand while working, and carry the front part of the box slightly higher than the rear part.

10. When working, press the button on the spray head to turn on the switch, then gently turn the adjusting valve knob according to work needs to adjust the size of the droplets, and then turn the speed adjustment Turn the knob to adjust the spray speed and distance.

11. Before spraying at close range, appropriately reduce the flow rate of the regulating valve. It is required to be free of impurities to prevent clogging of pipes.

12. After adjusting the flow rate of the regulating valve, spray the entire crystal lamp for 1-2 minutes, and sprinkle professional crystal lamp cleaning agent evenly on all parts.

13. Leave the cleaning agent on the surface of the crystal lamp for 3-5 minutes, so that the special cleaning agent can penetrate into the bottom layer of stains and oil stains on the surface of the crystal lamp, causing them to fall off, dissolve and emulsify.

14. Every time you turn off the power, please raise the spray head to allow the cleaning agent in the cleaning agent tube to flow back into the box to prevent dripping.

15. After the spraying work is completed, remove the excess cleaning agent residue in the particle injector. Pour in clean water, turn on the flow rate, turn on the machine for a while, wipe dry and store.

16. Use a high-temperature steam spray gun, install the extension hose, and insert it into the corresponding position until it is completely tight.

17. Gently press the steam button and observe whether the steam can be released. And pull the steam spray lock backward to lock the steam button and continue to supply steam. (Keep the power on during use)

18. Spray high-temperature steam spray evenly to all parts of the crystal lamp to increase the rapid decontamination and degreasing effect of the cleaning agent.

19. After use, unplug the high-temperature steam spray gun, cut off the power, press the steam button, and release the steam pressure until no steam comes out.

20. Pour out all the water from the high-temperature steam spray gun, dry it and put it in the tool box.

21. Take out the low-pressure micro-mist cleaner, open the cover, and inject clean water.

22. Adjust the adjustable nozzle to a light mist.

23. Adjust the air pressure of the micro mist cleaner to the highest pressure state.

24. Carry the low-pressure micro-mist cleaner on your shoulder, lock the spray rod into the micro-mist state, and hold the nozzle in one hand to evenly spray all parts of the crystal lamp.

25. After the spraying is completed, open the relief valve to release the remaining air pressure, drain the remaining clean water, and collect it in the tool box.

26. Connect the hair dryer to the 220V power supply, adjust it to hot air mode, and dry the remaining moisture on the surface of the crystal lamp.

27. Unplug the hair dryer, organize the power cord, and put it in the tool box.

28. Organize the site, clean up, and put away all tools. How to Clean Large Crystal Lamp 3

Crystal Lamp Cleaning Tips

1. When cleaning, please use a brush with long and soft bristles, and the longer the bristles of the brush, the better, through static electricity The function is to remove dust.

2. Select a special crystal lamp cleaner and spray it on the surface of the crystal lamp. This kind of cleaner has similar ingredients to alcohol and is volatile. It takes away dust during the evaporation process, but its actual cleaning ability is not very ideal.

3. We can also choose to disassemble the crystal lamp and clean it. If it is a relatively small crystal lamp, you can put it in a container filled with kerosene and use a toothbrush to clean the surface of the crystal lamp. For dust that is difficult to clean, you can soak it for a period of time and then add some washing powder for a second cleaning. If it is a relatively large crystal lamp, the bead string can be removed separately for cleaning, but during the disassembly process, attention should be paid to maintaining the overall balance of the lamp. It cannot be disassembled and washed at the same time, but must be disassembled from both sides at the same time.

4. When we clean the crystal lamp, in order to ensure safety, we must first cut off the power and take off the bulb, and wait until the cleaning is completed before installing it, especially when cleaning the lamp stand.

5. For cleaning the crystal lamp holder and related accessories, the wiping cloth should be soft and should not be stained with alcohol or water to avoid damaging the protective film of the holder and causing it to lose its luster.

6. During the cleaning process, if you find that the connecting buckle of the crystal lamp beads is discolored or rusty, you can replace it directly to avoid affecting the beauty of the crystal lamp.

Generally speaking, there are two main methods for cleaning crystal lamps: special detergent and kerosene. When cleaning the crystal lamp, we need to pay special attention not to use detergent and other corrosive liquid cleaners to avoid damaging the electroplated outer film of the crystal lamp. At the same time, do not use sharp instruments to clean the surface of the product to avoid scratches.